Adhesive and flame resistance behavior of poly(arylene ether phosphine oxide) (PEPO) and PEPO-modified epoxy resins

作者: K. U. Jeong , I. Y. Park , I. C. Kim , T. H. Yoon

DOI: 10.1002/APP.1204

关键词:

摘要: Poly(arylene ether phosphine oxide) (PEPO) with controlled molecular weights and amine end-groups was synthesized, used as an adhesive, a coating material for adherend or modifier diglycidyl of bisphenol A (DGEBA)-based epoxy resins. Closely related poly(arylene sulfone) commercial polyethersulfone, Udel® P-1700, were also utilized comparison purposes. Adhesive behavior measured via single lap shear samples function coated polymer type, test temperature (R.T. 100°C), aging condition in boiling distilled water 5% salt water. Flame resistance PEPO PEPO-modified resin evaluated by TGA flame test. exhibited better adhesive properties than PES P-1700. on Al markedly improved property even at 100°C, after study failure mode changed from to cohesive the PEPO. Aminophenyl terminated resins highly resistance, compared control samples. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1198–1205,

参考文章(17)
Edward W. Thrall, Raymond W. Shannon, Adhesive bonding of aluminum alloys Marcel Dekker, Inc.,New York, NY. ,(1985)
S. J. Bennett, G. P. Anderson, K. L. Devries, Analysis and testing of adhesive bonds Academic Press. ,(1977)
C. D. Smith, H. Grubbs, H. F. Webster, A. Gungör, J. P. Wightman, J. E. McGrath, Unique Characteristics Derived From Poly(Arylene Ether Phosphine Oxide)s High Performance Polymers. ,vol. 3, pp. 211- 229 ,(1991) , 10.1088/0954-0083/3/4/001
Hsien -Tang Chiu, Jeng -Shyong Lin, Electrochemical deposition of polypyrrole on carbon fibres for improved adhesion to the epoxy resin matrix Journal of Materials Science. ,vol. 27, pp. 319- 327 ,(1992) , 10.1007/BF00543919
J. Schwarz, M. Schmidt, A. Ohl, Synthesis of plasma-polymerized hexamethyldisiloxane (HMDSO) films by microwave discharge Surface & Coatings Technology. ,vol. 98, pp. 859- 864 ,(1998) , 10.1016/S0257-8972(97)00319-8
J. A. Bishopp, E. K. Sim, G. E. Thompson, G. C. Wood, The Adhesively Bonded Aluminium Joint: The Effect of Pretreatment on Durability Journal of Adhesion. ,vol. 26, pp. 237- 263 ,(1988) , 10.1080/00218468808071288
D. J. Riley, A. Gungor, S. A. Srinivasan, M. Sankarapandian, C. Tchatchoua, M. W. Muggli, T. C. Ward, J. E. McGrath, T. Kashiwagi, Synthesis and characterization of flame resistant poly(arylene ether)s Polymer Engineering and Science. ,vol. 37, pp. 1501- 1511 ,(1997) , 10.1002/PEN.11799
H. Nakamura, H. Kayanuma, S. Kimura, M. Kosugi, A new process for small boat production based on aluminum hot-blow forming (ABF) Journal of Materials Processing Technology. ,vol. 68, pp. 196- 205 ,(1997) , 10.1016/S0924-0136(96)00102-1
M. Tanoglu, S.H. McKnight, G.R. Palmese, J.W. Gillespie, Use of silane coupling agents to enhance the performance of adhesively bonded alumina to resin hybrid composites International Journal of Adhesion and Adhesives. ,vol. 18, pp. 431- 434 ,(1998) , 10.1016/S0143-7496(98)00021-9