Residual stress variation in a thick welded joint after ultrasonic impact treatment
作者： Chuan Liu , Qinglei Ge , Dongjun Chen , Fei Gao , Jiasheng Zou
DOI: 10.1080/13621718.2016.1149932
关键词:
摘要: The effects of ultrasonic impact treatment (UIT) on the residual stress within a 45 mm-thick high-strength steel welded joint were investigated. internal stresses after UIT was measured with contour method and compared as-welded simulated by finite element method. surface also X-ray diffraction hole-drilling to validate simulation model. Results show that introduces compressive layer in weld zone has same effect longitudinal transverse welding stresses; interior increase demonstrate more uniform distribution UIT; would not affect initial presented far away from zone.
sci-hub.se 参考文章(36)
R. I. Basu, R. Bell, L. Caron, K. J. Kirkhope, Weld Detail Fatigue Life Improvement Techniques ,(1996)
Abhishek Mitra, N Siva Prasad, GD Janaki Ram, None, Estimation of residual stresses in an 800 mm thick steel submerged arc weldment Journal of Materials Processing Technology. ,vol. 229, pp. 181- 190 ,(2016) , 10.1016/J.JMATPROTEC.2015.09.007
M. B. Prime, Cross-sectional mapping of residual stresses by measuring the surface contour after a cut Journal of Engineering Materials and Technology-transactions of The Asme. ,vol. 123, pp. 162- 168 ,(2001) , 10.1115/1.1345526
P. R. Hurrell, D. Everett, A. Gregg, S. Bate, Review of Residual Stress Mitigation Methods for Application in Nuclear Power Plant ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. pp. 801- 812 ,(2006) , 10.1115/PVP2006-ICPVT-11-93381
Omar Hatamleh, Adrian DeWald, An investigation of the peening effects on the residual stresses in friction stir welded 2195 and 7075 aluminum alloy joints Journal of Materials Processing Technology. ,vol. 209, pp. 4822- 4829 ,(2009) , 10.1016/J.JMATPROTEC.2008.12.010
Wei Liang, Hidekazu Murakawa, Dean Deng, Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start Materials & Design. ,vol. 67, pp. 303- 312 ,(2015) , 10.1016/J.MATDES.2014.11.037
C. Liu, H-Y. Zhu, C-L. Dong, Internal residual stress measurement on inertia friction welding of nickel-based superalloy Science and Technology of Welding and Joining. ,vol. 19, pp. 408- 415 ,(2014) , 10.1179/1362171814Y.0000000206
Wanchuck Woo, Vyacheslav Em, Pavel Mikula, Gyu-Baek An, Baek-Seok Seong, Neutron diffraction measurements of residual stresses in a 50 mm thick weld Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 4120- 4124 ,(2011) , 10.1016/J.MSEA.2011.02.009
Na-Hyun Soh, Nam-Su Huh, Jun-Seok Yang, Effect of the Groove Shape on Residual Stress Distribution of Narrow Gap Welds Volume 6: Materials and Fabrication, Parts A and B. pp. 1179- 1185 ,(2011) , 10.1115/PVP2011-57195
Z. Cai, H. Zhao, Efficient finite element approach for modelling of actual welded structures Science and Technology of Welding and Joining. ,vol. 8, pp. 195- 204 ,(2003) , 10.1179/136217103225010916