Wytrzymałość zmęczeniowa złączy spawanych ze stali dupleks
作者： H. Matysiak , J. Nowacki , P. Zając , K. J. Kurzydłowski
DOI:
关键词:
摘要:
参考文章(17)
J. Nowacki, P. Zając, Wpływ szerokoszczelinowego spawania jednostronnego drutem rdzeniowym stali duplex na strukturę i odporność korozyjną złączy spawanych Przegląd Spawalnictwa. pp. 4- 11 ,(2007)
J. A. Jimenez, M. Carsi, O. A. Ruano, F. Peñalba, Characterization of a δ/γ duplex stainless steel Journal of Materials Science. ,vol. 35, pp. 907- 915 ,(2000) , 10.1023/A:1004750424897
S. Bugat, J. Besson, A.-F. Gourgues, F. N'Guyen, A. Pineau, Microstructure and damage initiation in duplex stainless steels Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 317, pp. 32- 36 ,(2001) , 10.1016/S0921-5093(01)01196-0
J.D Kordatos, G Fourlaris, G Papadimitriou, The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds Scripta Materialia. ,vol. 44, pp. 401- 408 ,(2001) , 10.1016/S1359-6462(00)00613-8
Jie Cui, In-Sung Park, Chang-Yong Kang, Kazuya Miyahara, Degradation of Impact Toughness due to Formation of R Phase in High Nitrogen 25Cr-7Ni-Mo Duplex Stainless Steels Isij International. ,vol. 41, pp. 192- 195 ,(2001) , 10.2355/ISIJINTERNATIONAL.41.192
T.H Chen, K.L Weng, J.R Yang, The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 338, pp. 259- 270 ,(2002) , 10.1016/S0921-5093(02)00093-X
Kwang Min Lee, Hoon Sung Cho, Dap Chun Choi, Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austenite Journal of Alloys and Compounds. ,vol. 285, pp. 156- 161 ,(1999) , 10.1016/S0925-8388(99)00014-6
Christof Messner, Vadim V. Silberschmidt, Ewald A. Werner, Thermally induced surface roughness in austenitic–ferritic duplex stainless steels Acta Materialia. ,vol. 51, pp. 1525- 1537 ,(2003) , 10.1016/S1359-6454(02)00545-1
K Makhlouf, H Sidhom, I Triguia, C Braham, Corrosion fatigue crack propagation of a duplex stainless steel X6 Cr Ni Mo Cu 25-6 in air and in artificial sea water International Journal of Fatigue. ,vol. 25, pp. 167- 179 ,(2003) , 10.1016/S0142-1123(02)00046-4
A. P. Miodownik, N. Saunders, Modelling of materials properties in duplex stainless steels Materials Science and Technology. ,vol. 18, pp. 861- 868 ,(2002) , 10.1179/026708302225004694