Reinforced-Core Particleboard for Improved Screw-Holding Ability
作者： S. Haghdan , K. E. Semple , D. Xian , G. D. Smith
DOI:
关键词:
摘要: Applications of commodity particleboard are currently restricted by low screw-holding strength and stiffness. Replacing the core particles with small strands that used in oriented strandboard (OSB) to produce a "particle-strand-particle" (PSP) hybrid can significantly improve properties. In this study, set particleboards was fabricated standard particles, randomly arranged OSB strands, or aligned assess effects particle replacement their orientation core. PSP-random board similar laboratory random properties such as density profiles, internal bond strength, edge screw withdrawal resistance, but its were improved compared control particleboard. PSP boards had higher thickness swelling typical strand-based composites. Particleboard PSP-oriented lower surface density, whereas density. Core strand methodology problematic, further optimization could potentially enhance utility M2- M3-grade into more load-bearing applications.
参考文章(23)
Kate Semple, Emmanuel Sackey, He Jun Park, Gregory D Smith, None, Properties comparison of furniture grade MS and M2 particleboard products manufactured in Canada. Forest Products Journal. ,vol. 55, pp. 125- 131 ,(2005)
Kate E Semple, Gregory D Smith, None, Prediction of Internal Bond Strength in Particleboard from Screw Withdrawal Resistance Models Wood and Fiber Science. ,vol. 38, pp. 256- 267 ,(2006)
Myron W. Kelly, Critical Literature Review of Relationships Between Processing Parameters and Physical Properties of Particleboard. Gen. Tech. Rep. FPL-10. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 65 p.. ,vol. 010, ,(1977)
Emmanuel K Sackey, Gregory D Smith, None, Empirical Distribution Models for Slenderness and Aspect Ratios of Core Particles of Particulate Wood Composites Wood and Fiber Science. ,vol. 41, pp. 255- 266 ,(2009)
Dongjin Song, Simon Ellis, Localized Properties in Flakeboard: A Simulation Using Stacked Flakes Wood and Fiber Science. ,vol. 29, pp. 353- 363 ,(1997)
Emmanuel K Sackey, Chao Zhang, Ying-Li Tsai, Antoine Prats, Gregory D Smith, None, Feasibility of a New Hybrid Wood Composite Comprising Wood Particles and Strands Wood and Fiber Science. ,vol. 43, pp. 11- 20 ,(2011)
J.M.W. Dinwoodie, J.-A. Higgins, D.J. Robson, B.H. Paxton, Creep in chipboard Wood Science and Technology. ,vol. 24, pp. 181- 189 ,(1990) , 10.1007/BF00229053
F. A. Kamke, D. A. Dillard, M. P. Wolcott, Fundamentals of flakeboard manufacture: viscoelastic behavior of the wood component. Wood and Fiber Science. ,vol. 22, pp. 345- 361 ,(1990)
Stephen W. Day, Daniel M. Hutcheson, Composite wall panel assembly and method of production ,(1977)
A. F. Halligan, A review of thickness swelling in particleboard. Wood Science and Technology. ,vol. 4, pp. 301- 312 ,(1970) , 10.1007/BF00386406