Evaluation of grinding strategy for bioceramic material through a single grit scratch test using force and acoustic emission signals
作者： Suya Prem Anand P. , Arunachalam N. , Vijayaraghavan L.
DOI: 10.1016/J.JMAPRO.2018.12.006
关键词:
摘要: A specified geometry of diamond indenter with different rake angles such as 0°,− 2° and− 4° were used in single scratch experiments to study the mode of material removal on both the sintered and pre-sintered yttria-stabilized tetragonal zirconia (Y-TZP). To evaluate these features during the scratch experiment, the generated forces and the acoustic emission signals were correlated with the surface morphology of scratches. The results indicated that the forces generated by the higher negative rake angle (− 4°) increase with reduced …
sci-hub.se 参考文章(21)
Handbook of Advanced Ceramics Machining CRC Press. ,(2006) , 10.1201/9781420005547
Vijayender Singh, P. Venkateswara Rao, S. Ghosh, Development of specific grinding energy model International Journal of Machine Tools & Manufacture. ,vol. 60, pp. 1- 13 ,(2012) , 10.1016/J.IJMACHTOOLS.2011.11.003
M.M. Rashad, H.M. Baioumy, Effect of thermal treatment on the crystal structure and morphology of zirconia nanopowders produced by three different routes Journal of Materials Processing Technology. ,vol. 195, pp. 178- 185 ,(2008) , 10.1016/J.JMATPROTEC.2007.04.135
L E A Sanchez, J F G Oliveira, R T Coelho, Detection of cracks in scratching tests in ceramic materials through acoustic emission Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. ,vol. 219, pp. 685- 693 ,(2005) , 10.1243/095440505X32616
U.S. Patnaik Durgumahanti, Vijayender Singh, P. Venkateswara Rao, A New Model for Grinding Force Prediction and Analysis International Journal of Machine Tools & Manufacture. ,vol. 50, pp. 231- 240 ,(2010) , 10.1016/J.IJMACHTOOLS.2009.12.004
D. Giridhar, L. Vijayaraghavan, R. Krishnamurthy, Acoustic emission response of sintered alumina zirconia composite during grooving process Ndt & E International. ,vol. 46, pp. 55- 62 ,(2012) , 10.1016/J.NDTEINT.2011.11.002
Javad Akbari, Yoshio Saito, Tadaaki Hanaoka, Shizuichi Higuchi, Shinzo Enomoto, Effect of grinding parameters on acoustic emission signals while grinding ceramics Journal of Materials Processing Technology. ,vol. 62, pp. 403- 407 ,(1996) , 10.1016/S0924-0136(96)02443-0
T. G. Bifano, T. A. Dow, R. O. Scattergood, Ductile-Regime Grinding: A New Technology for Machining Brittle Materials Journal of Engineering for Industry. ,vol. 113, pp. 184- 189 ,(1991) , 10.1115/1.2899676
T. Matsuo, S. Toyoura, E. Oshima, Y. Ohbuchi, Effect of Grain Shape on Cutting Force in Superabrasive Single-Grit Tests CIRP Annals. ,vol. 38, pp. 323- 326 ,(1989) , 10.1016/S0007-8506(07)62714-0
J. Webster, I. Marinescu, R. Bennett, R. Lindsay, Acoustic emission for process control and monitoring of surface integrity during grinding CIRP Annals. ,vol. 43, pp. 299- 304 ,(1994) , 10.1016/S0007-8506(07)62218-5