Methane storage in zeolite-like carbon materials

作者: Myrsini K. Antoniou , Evmorfia K. Diamanti , Apostolos Enotiadis , Alfonso Policicchio , Konstantinos Dimos

DOI: 10.1016/J.MICROMESO.2013.12.030

关键词:

摘要: High specific surface area zeolite-like carbon materials (CZ) were synthesized by combining the hard template method with Chemical Vapor Deposition (CVD), using zeolite beta as solid and acetylene precursor, at different reaction temperatures (1023, 1073 1123 K). CZ characterized X-ray diffraction, Scanning Electron Microscopy nitrogen adsorption– desorption measurements. The nanoporous possess areas up to 1130 m 2 /g total pore volumes 0.75 mL/g while XRD data SEM images show successful replication of structure morphology particles into final materials. Methane storage properties (287, 298 313 K) have been investigated Sievert’s-type apparatus 3.5 MPa. exhibit a high reversible methane capacity, measured gravimetric uptake 8.0 wt% K MPa, much higher value compared pristine which shows adsorption capacity 1.5 same conditions. analysis obtained isotherm curves To 9th model grade homogeneity on sample porosity for all probed samples evaluation enthalpy low pressures reveals similar binding energy between molecules samples’ surfaces despite their long range order.

参考文章(40)
Efstathios E. (Stathis) Michaelides, Alternative Energy Sources ,(2012)
Timothy D. Burchell, Carbon materials for advanced technologies Pergamon. ,(1999)
J. Rouquerol, P. Llewellyn, F. Rouquerol, Is the bet equation applicable to microporous adsorbents Studies in Surface Science and Catalysis. ,vol. 160, pp. 49- 56 ,(2007) , 10.1016/S0167-2991(07)80008-5
P.M Barata-Rodrigues, T.J Mays, G.D Moggridge, Structured carbon adsorbents from clay, zeolite and mesoporous aluminosilicate templates Carbon. ,vol. 41, pp. 2231- 2246 ,(2003) , 10.1016/S0008-6223(03)00252-5
Xiaolin Wang, Benjamin Lee, Hui Tong Chua, Methane desorption and adsorption measurements on activated carbon in 281–343 K and pressures to 1.2 MPa Journal of Thermal Analysis and Calorimetry. ,vol. 110, pp. 1475- 1485 ,(2012) , 10.1007/S10973-011-2108-2
Joseph L. Zuech, Anthony L. Hines, E. Dendy Sloan, Methane adsorption on 5A molecular sieve in the pressure range 4 to 690 kPa Industrial & Engineering Chemistry Process Design and Development. ,vol. 22, pp. 172- 174 ,(1983) , 10.1021/I200020A030
Enrico Maccallini, Theodoros Tsoufis, Alfonso Policicchio, Salvatore La Rosa, Tommaso Caruso, Gennaro Chiarello, Elio Colavita, Vincenzo Formoso, Dimitrios Gournis, Raffaele G. Agostino, A spectro-microscopic investigation of Fe–Co bimetallic catalysts supported on MgO for the production of thin carbon nanotubes Carbon. ,vol. 48, pp. 3434- 3445 ,(2010) , 10.1016/J.CARBON.2010.05.039
Hirotomo Nishihara, Hiroyuki Itoi, Taichi Kogure, Peng-Xiang Hou, Hidekazu Touhara, Fujio Okino, Takashi Kyotani, Investigation of the Ion Storage/Transfer Behavior in an Electrical Double‐Layer Capacitor by Using Ordered Microporous Carbons as Model Materials Chemistry: A European Journal. ,vol. 15, pp. 5355- 5363 ,(2009) , 10.1002/CHEM.200802406
Alfonso Policicchio, Enrico Maccallini, Raffaele Giuseppe Agostino, Federica Ciuchi, Alfredo Aloise, Girolamo Giordano, Higher methane storage at low pressure and room temperature in new easily scalable large-scale production activated carbon for static and vehicular applications Fuel. ,vol. 104, pp. 813- 821 ,(2013) , 10.1016/J.FUEL.2012.07.035
Han-Kyol Youn, Jun Kim, Govindasamy Chandrasekar, Hangkyo Jin, Wha-Seung Ahn, High pressure carbon dioxide adsorption on nanoporous carbons prepared by Zeolite Y templating Materials Letters. ,vol. 65, pp. 1772- 1774 ,(2011) , 10.1016/J.MATLET.2011.03.039