2D triangular anti-trichiral structures and auxetic stents with symmetric shrinkage behavior and high energy absorption

作者: Ramin Hamzehei , Saeed Rezaei , Javad Kadkhodapour , Ali Pourkamali Anaraki , Alireza Mahmoudi

DOI: 10.1016/J.MECHMAT.2019.103291

关键词:

摘要: Abstract In this study, 2D triangular anti-trichiral structures and auxetic stents, under compression, were introduced. The cores of the equilateral triangles. deformation mechanisms in based on rotation triangles bending ligaments. A parametric study was carried out to investigate dependence Poisson's ratio triangle edge lengths. most auxeticity, with values υ y z  = −0.55  = −1.6, obtained structure which lengths considered 13 mm. Next, stents aims uniform shrinkage behaviors as well high energy absorption For purpose, distributed cylindrical surfaces along peripheral longitudinal directions. Under stent 15mm possessed behavior, measured x  = −2.2  = −2.19. Finally, comparisons between conventional performed. It observed that lateral displacements, twice three times respectively.

参考文章(48)
S. Mohsenizadeh, R. Alipour, M. Shokri Rad, A. Farokhi Nejad, Z. Ahmad, Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading Materials & Design. ,vol. 88, pp. 258- 268 ,(2015) , 10.1016/J.MATDES.2015.08.152
Zhengyue Wang, Hong Hu, 3D auxetic warp‐knitted spacer fabrics Physica Status Solidi B-basic Solid State Physics. ,vol. 251, pp. 281- 288 ,(2014) , 10.1002/PSSB.201384239
R. Lakes, Deformation mechanisms in negative Poisson's ratio materials : structural aspects Journal of Materials Science. ,vol. 26, pp. 2287- 2292 ,(1991) , 10.1007/BF01130170
B. Brandel, R. S. Lakes, Negative Poisson's ratio polyethylene foams Journal of Materials Science. ,vol. 36, pp. 5885- 5893 ,(2001) , 10.1023/A:1012928726952
Zhaoyang Ge, Hong Hu, Yanping Liu, A finite element analysis of a 3D auxetic textile structure for composite reinforcement Smart Materials and Structures. ,vol. 22, pp. 084005- ,(2013) , 10.1088/0964-1726/22/8/084005
Jin-Shui Yang, Jian Xiong, Li Ma, Li-Na Feng, Shu-Yang Wang, Lin-Zhi Wu, Modal response of all-composite corrugated sandwich cylindrical shells Composites Science and Technology. ,vol. 115, pp. 9- 20 ,(2015) , 10.1016/J.COMPSCITECH.2015.04.015
Joseph N. Grima, Andrew Alderson, Kenneth E. Evans, An Alternative Explanation for the Negative Poisson's Ratios in Auxetic Foams Journal of the Physical Society of Japan. ,vol. 74, pp. 1341- 1342 ,(2005) , 10.1143/JPSJ.74.1341
Hualin Fan, Daining Fang, Liming Chen, Zheng Dai, Wei Yang, Manufacturing and testing of a CFRC sandwich cylinder with Kagome cores Composites Science and Technology. ,vol. 69, pp. 2695- 2700 ,(2009) , 10.1016/J.COMPSCITECH.2009.08.012
W. Miller, C.W. Smith, K.E. Evans, Honeycomb cores with enhanced buckling strength Composite Structures. ,vol. 93, pp. 1072- 1077 ,(2011) , 10.1016/J.COMPSTRUCT.2010.09.021
Kim Alderson, Andrew Alderson, Subhash Anand, Virginia Simkins, Shonali Nazare, Naveen Ravirala, Auxetic warp knit textile structures Physica Status Solidi B-basic Solid State Physics. ,vol. 249, pp. 1322- 1329 ,(2012) , 10.1002/PSSB.201084216