Influence of geometric parameters and cutting edge deterioration on the differential inductances
作者： Andreas Boehm , Ingo Hahn
DOI: 10.1109/SLED.2014.6844969
关键词:
摘要:
sci-hub.se 参考文章(12)
M. Linke, R. Kennel, J. Holtz, Sensorless speed and position control of synchronous machines using alternating carrier injection international electric machines and drives conference. ,vol. 2, pp. 1211- 1217 ,(2003) , 10.1109/IEMDC.2003.1210394
Markus Seilmeier, Sebastian Ebersberger, Bernhard Piepenbreier, HF Test Current Injection-Based Self-Sensing Control of PMSM for Low- and Zero-Speed Range Using Two-Degree-of-Freedom Current Control IEEE Transactions on Industry Applications. ,vol. 51, pp. 1- 8 ,(2015) , 10.1109/SLED.2014.6844962
Sebastian Ebersberger, Bernhard Piepenbreier, Identification of differential inductances of permanent magnet synchronous machines using test current signal injection International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion. pp. 1342- 1347 ,(2012) , 10.1109/SPEEDAM.2012.6264392
Ingo Hahn, Differential magnetic anisotropy - prerequisite for rotor position detection of PM-synchronous machines with signal injection methods 2010 First Symposium on Sensorless Control for Electrical Drives. pp. 40- 49 ,(2010) , 10.1109/SLED.2010.5542803
A. Schoppa, J. Schneider, J.-O. Roth, Influence of the cutting process on the magnetic properties of non-oriented electrical steels Journal of Magnetism and Magnetic Materials. ,vol. 215, pp. 100- 102 ,(2000) , 10.1016/S0304-8853(00)00077-9
Sebastian Ebersberger, Markus Seilmeier, Bernhard Piepenbreier, Flatness based sensorless control of PMSM using test current signal injection and compensation for differential cross-coupling inductances at standstill and low speed range 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE). pp. 1- 7 ,(2013) , 10.1109/SLED-PRECEDE.2013.6684510
A Kedous-Lebouc, B Cornut, J.C Perrier, Ph Manfé, Th Chevalier, Punching influence on magnetic properties of the stator teeth of an induction motor Journal of Magnetism and Magnetic Materials. ,vol. 254, pp. 124- 126 ,(2003) , 10.1016/S0304-8853(02)00803-X
A Schoppa, H Louis, F Pude, Ch von Rad, Influence of abrasive waterjet cutting on the magnetic properties of non-oriented electrical steels Journal of Magnetism and Magnetic Materials. ,vol. 254, pp. 370- 372 ,(2003) , 10.1016/S0304-8853(02)00882-X
Andreas Boehm, Johannes Graus, Ingo Hahn, Markus Seilmeier, Influence of partly closed slots on the differential inductances 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012). pp. 1- 6 ,(2012) , 10.1109/SLED.2012.6422819
Heiko Peter, Ingo Hahn, Determination of differential inductances of permanent magnet synchronous machines for sensorless control international electric machines and drives conference. pp. 1579- 1584 ,(2011) , 10.1109/IEMDC.2011.5994569