Fabrication of Copper-Based Anodes Via Atmosphoric Plasma Spraying Techniques

作者: Chun Lu

DOI:

关键词:

摘要: A fuel electrode anode (18) for a solid oxide cell is made by presenting having an electrolyte surface (15), mixing copper powder with in step (24, 44) to provide spray feedstock (30,50) which fed into plasma jet (32, 52) of torch melt the feed stock and propel it onto (34, 54) where flattens lamellae layer upon solidification, (38, 59) coating greater than 35 vol. % based on solids volume.

参考文章(33)
Shung-Ik Lee, Kipyung Ahn, John M. Vohs, Raymond J. Gorte, Cu-Co Bimetallic Anodes for Direct Utilization of Methane in SOFCs Electrochemical and Solid State Letters. ,vol. 8, ,(2005) , 10.1149/1.1833678
Nguyen Q. Minh, Ceramic Fuel Cells Journal of the American Ceramic Society. ,vol. 76, pp. 563- 588 ,(1993) , 10.1111/J.1151-2916.1993.TB03645.X
R. J. Gorte, S. Park, J. M. Vohs, C. Wang, Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid‐Oxide Fuel Cell Advanced Materials. ,vol. 12, pp. 1465- 1469 ,(2000) , 10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9
C. Lu, W. L. Worrell, R. J. Gorte, J. M. Vohs, SOFCs for Direct Oxidation of Hydrocarbon Fuels with Samaria-Doped Ceria Electrolyte Journal of The Electrochemical Society. ,vol. 150, ,(2003) , 10.1149/1.1553765
Roswell J. Ruka, Srikanth Gopalan, George R. Folser, Plasma sprayed ceramic-metal fuel electrode ,(2003)
Hideo Takeuchi, Hiroyuki Hashimoto, Michiaki Kobayashi, Daiji Suzuki, Method for forming register marks ,(1985)
Wilhelm Kleinlein, Norbert Landgraf, Joachim Grosse, Horst Greiner, Werner Merz, High temperature solid electrolyte fuel cell and fuel cell installation built with said fuel cell ,(2005)