A 3D super-elastic model for shape memory alloys taking into account progressive strain under cyclic loadings
作者： Luc Saint-Sulpice , Shabnam Arbab Chirani , Sylvain Calloch
DOI: 10.1016/J.MECHMAT.2008.07.004
关键词:
摘要: This paper concerns the mechanical behavior of super-elastic polycrystalline shape memory alloys under cyclic loadings. Sometimes, as shown by many experimental observations, a permanent inelastic strain occurs and increases with number cycles. A series tests has been carried out used to develop 3D macroscopic model for super-elasticity SMAs able describe evolution during
archives-ouvertes.fr
elsevier.com
sci-hub.se 参考文章(65)
K. Taillard, S. Arbab Chirani, S. Calloch, C. Lexcellent, Equivalent transformation strain and its relation with martensite volume fraction for isotropic and anisotropic shape memory alloys Mechanics of Materials. ,vol. 40, pp. 151- 170 ,(2008) , 10.1016/J.MECHMAT.2007.07.005
N. Ohno, J.-D. Wang, Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior International Journal of Plasticity. ,vol. 9, pp. 375- 390 ,(1993) , 10.1016/0749-6419(93)90042-O
Z.K. Lu, G.J. Weng, A self-consistent model for the stress-strain behavior of shape-memory alloy polycrystals Acta Materialia. ,vol. 46, pp. 5423- 5433 ,(1998) , 10.1016/S1359-6454(98)00203-1
James G. Boyd, Dimitris C. Lagoudas, Thermodynamical constitutive model for the shape memory effect due to transformation and reorientation 1994 North American Conference on Smart Structures and Materials. ,vol. 2189, pp. 276- 288 ,(1994) , 10.1117/12.174064
Davide Bigoni, Andrea Piccolroaz, Yield criteria for quasibrittle and frictional materials International Journal of Solids and Structures. ,vol. 41, pp. 2855- 2878 ,(2004) , 10.1016/J.IJSOLSTR.2003.12.024
Lars Krone, Juliane Mentz, Martin Bram, H‐P Buchkremer, Detlev Stöver, Martin Wagner, Gunther Eggeler, Daniel Christ, Stefanie Reese, Denise Bogdanski, Manfred Köller, Stefan Alexander Esenwein, Gert Muhr, Oleg Prymak, Matthias Epple, The Potential of Powder Metallurgy for the Fabrication of Biomaterials on the Basis of Nickel‐Titanium: A Case Study with a Staple Showing Shape Memory Behaviour Advanced Engineering Materials. ,vol. 7, pp. 613- 619 ,(2005) , 10.1002/ADEM.200500029
Pavlin B. Entchev, Dimitris C. Lagoudas, Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys. Part II: porous SMA response Mechanics of Materials. ,vol. 36, pp. 893- 913 ,(2004) , 10.1016/J.MECHMAT.2003.08.005
Dimitris C. Lagoudas, Pavlin B. Entchev, Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys. Part I: constitutive model for fully dense SMAs Mechanics of Materials. ,vol. 36, pp. 865- 892 ,(2004) , 10.1016/J.MECHMAT.2003.08.006
L Catherine Brinson, Ina Schmidt, Rolf Lammering, Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy Journal of The Mechanics and Physics of Solids. ,vol. 52, pp. 1549- 1571 ,(2004) , 10.1016/J.JMPS.2004.01.001
M. Arrigoni, F. Auricchio, V. Cacciafesta, L. Petrini, R. Pietrabissa, Mechanical characterisation of orthodontic superelastic Ni-Ti wires Journal De Physique Iv. ,vol. 11, pp. 577- 582 ,(2001) , 10.1051/JP4:2001896