Mechanical properties of ultra clean low C/Cr stabilized annealed sheets
作者： A. Molina , B. Campillo , R. Mendoza , R. Guardián , Carlos González-Rivera
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.509.31
关键词:
摘要: The microstructural and mechanical properties of an ultra-clean low carbon steel sheet with 0.035% Cr have been evaluated. isothermal recrystallization kinetics at 800 oC is analyzed by using the Kolomogorov-Johnson-Mehl-Avrami (KJMA) equation. obtained results indicate that retards owing to presence fine particles chromium carbides. annealing process produces a fully recrystallized microstructure. main texture components in specimens are: {111}, {112} {111}. These are related Lankford value elongation. suggest formability this excellent.
sci-hub.se 参考文章(13)
Natsuko Hashimoto, Naoki Yoshinaga, Takehide Senuma, Texture Evolution of IF Steel Due to Recrystallization Isij International. ,vol. 38, pp. 617- 624 ,(1998) , 10.2355/ISIJINTERNATIONAL.38.617
I. Weiss, J. J. Jonas, Dynamic precipitation and coarsening of niobium carbonitrides during the hot compression of HSLA steels Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 11, pp. 403- 410 ,(1980) , 10.1007/BF02654564
M. Hua, C. I. Garcia, A. J. DeArdo, Precipitation behavior in ultra-low-carbon steels containing titanium and niobium Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 28, pp. 1769- 1780 ,(1997) , 10.1007/S11661-997-0108-4
I. Samajdar, B. Verlinden, P. Van Houtte, D. Vanderschueren, Recrystallisation kinetics in IF-steel: A study on the sluggish recrystallisation behaviour Scripta Materialia. ,vol. 37, pp. 869- 874 ,(1997) , 10.1016/S1359-6462(97)00185-1
L. J. Cuddy, Microstructures developed during thermomechanical treatment of HSLA steels Metallurgical Transactions A. ,vol. 12, pp. 1313- 1320 ,(1981) , 10.1007/BF02642345
Mingjian Hua, C.I. Garcia, A.J. DeArdo, Multi-phase precipitates in interstitial-free steels Scripta Metallurgica et Materialia. ,vol. 28, pp. 973- 978 ,(1993) , 10.1016/0956-716X(93)90065-Z
Hiroshi Takechi, Metallurgical Aspects on Interstitial Free Sheet Steel From Industrial Viewpoints Isij International. ,vol. 34, pp. 1- 8 ,(1994) , 10.2355/ISIJINTERNATIONAL.34.1
R Mendoza, A Molina, F Serrania, JA Juarez-Islas, Mechanical properties of a recrystallized low carbon steel Scripta Materialia. ,vol. 48, pp. 391- 395 ,(2003) , 10.1016/S1359-6462(02)00453-0
R Mendoza, J Camacho, G Lugo, C Lopez, L Herrera, J Reyes, C Gonalez, Juarez-Islas JA, None, Structure of a Low Carbon Al-killed/Ti-added Steel Isij International. ,vol. 37, pp. 176- 180 ,(1997) , 10.2355/ISIJINTERNATIONAL.37.176
S. S. Hansen, J.B. Vander Sande, Morris Cohen, Niobium carbonitride precipitation and austenite recrystallization in hot-rolled microalloyed steels Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 11, pp. 387- 402 ,(1980) , 10.1007/BF02654563