Effects of ultrasonic surface rolling processing and plasma nitriding on the fretting wear behavior of Inconel 690TT
作者： Junbiao Liu , Xuehui Zhang , Ziyi Cui , Tahir Ahmad , Chunming Wang
DOI: 10.1016/J.SURFCOAT.2020.126312
关键词:
摘要: Abstract Inconel 690TT has been applied to steam generator for transport tube, which fretting wear (FW) will cause serious damage on it. In this work, the ultrasonic surface rolling processing (USRP), plasma nitriding (PN) and combined with process (USRP+PN) are improving behavior of 690TT. The results show that a high fraction grain boundaries is induced after USRP. Compared untreated specimens, hardness specimen treated by USRP, PN USRP + increased 191%, 295% 348%, respectively. It can be attributed improve gradient nanostructure (GNS) layer, enhance changing chemical composition near top surface. After USRP+PN, volume decreased 72%, 86%, 96%, indicated resistance benign effect between processes arranged as USRP+PN > PN > USRP > untreated, provide potential way
sci-hub.st 参考文章(42)
P.K. Aw, A.W. Batchelor, N.L. Loh, Structure and tribological properties of plasma nitrided surface films on Inconel 718 Surface and Coatings Technology. ,vol. 89, pp. 70- 76 ,(1997) , 10.1016/S0257-8972(96)02937-4
C. Leroy, T. Czerwiec, C. Gabet, T. Belmonte, H. Michel, Plasma assisted nitriding of Inconel 690 Surface & Coatings Technology. ,vol. 142, pp. 241- 247 ,(2001) , 10.1016/S0257-8972(01)01243-9
Zhiming Zhang, Jianqiu Wang, En-Hou Han, Wei Ke, Effects of Surface State and Applied Stress on Stress Corrosion Cracking of Alloy 690TT in Lead-containing Caustic Solution Journal of Materials Science & Technology. ,vol. 28, pp. 785- 792 ,(2012) , 10.1016/S1005-0302(12)60131-5
M. Helmi Attia, Fretting fatigue and wear damage of structural components in nuclear power stations—Fitness for service and life management perspective Tribology International. ,vol. 39, pp. 1294- 1304 ,(2006) , 10.1016/J.TRIBOINT.2006.02.052
T. Balusamy, T.S.N. Sankara Narayanan, K. Ravichandran, Il Song Park, Min Ho Lee, Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel Corrosion Science. ,vol. 74, pp. 332- 344 ,(2013) , 10.1016/J.CORSCI.2013.04.056
H. He, T. Czerwiec, C. Dong, H. Michel, Effect of grain orientation on the nitriding rate of a nickel base alloy studied by electron backscatter diffraction Surface & Coatings Technology. pp. 331- 338 ,(2003) , 10.1016/S0257-8972(02)00611-4
M. Mubarak Ali, S. Ganesh Sundara Raman, S.D. Pathak, R. Gnanamoorthy, Influence of plasma nitriding on fretting wear behaviour of Ti–6Al–4V Tribology International. ,vol. 43, pp. 152- 160 ,(2010) , 10.1016/J.TRIBOINT.2009.05.020
F. Mindivan, H. Mindivan, Comparisons of Wear Performance of Hardened Inconel 600 by Different Nitriding Processes Procedia Engineering. ,vol. 68, pp. 730- 735 ,(2013) , 10.1016/J.PROENG.2013.12.246
Varshni Singh, Efstathios I. Meletis, Synthesis, characterization and properties of intensified plasma-assisted nitrided superalloy Inconel 718 Surface & Coatings Technology. ,vol. 201, pp. 1093- 1101 ,(2006) , 10.1016/J.SURFCOAT.2006.01.034
Yimin Lin, Jian Lu, Liping Wang, Tao Xu, Qunji Xue, Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel Acta Materialia. ,vol. 54, pp. 5599- 5605 ,(2006) , 10.1016/J.ACTAMAT.2006.08.014