Vehicle steering device
作者： 崇 田代 , Takashi Tashiro
DOI:
关键词:
摘要: PROBLEM TO BE SOLVED: To provide a vehicle steering device that regulates rotation of shaft at low cost.SOLUTION: A 6 inserted in housing 5 has first end 61, second 62, and an intermediate section 63. bushing 71 72 held by the support ends 61 62 6, respectively, axial directions X1 X2 slidable manner. central line C3 part 63 is offset predetermined amount e from C1 C2 62. C4 ball nut 33 aligned with The bushings serve as whirl-stop 6.
lens.org 参考文章(37)
Anthony Wroblewski, Tactile electronic steering system ,(2006)
Brian E. Daugherty, Yixin Yao, Control of a steering wheel system with passive resistance torque ,(2004)
Christopher Blair, William Vukovich, Jin Li, Torque limiting accessory drive assembly ,(2001)
Teruhiko Takatani, Hirotaka Kanazawa, Naoto Takata, Four-wheel-steering device for vehicle ,(1983)
Friedrich Dipl.-Ing. Saibold, Ulrich Dipl.-Ing. Mair, Stefan Dipl.-Ing. Wallner, Vehicle e.g. construction vehicle, has axle realizing requested steering angle by Ackermann steering, whose steering kinematics is modified in area between steering links and wheel hubs based on required angle ,(2004)
Michael Patrick Lopez, Aaron L. Mills, Steer-by-wire steering system with rotation limiter ,(2002)
Farhad Bolourchi, Feed forward-feed back control for steer-by-wire system ,(2001)
Latzen Josef, Resilient steering linkage connection ,(1950)
Tsukasa Ikeuchi, 勝也 甲斐, Katsuya Kai, 司 池内, Joystick device for controlling construction vehicle ,(1997)