Comparison of Material Removal Characteristics in Single and Multiple Cutting Edge Scratches
作者： Xun Chen , Tahsin Tecelli Öpöz
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.797.189
关键词:
摘要: This paper presents the important characteristics of material removal mechanism during single grit scratching test. Material removal mechanism in these scratches shows cutting and ploughing action varies with the number of cutting edges leading to different cutting force and specific energy. According to experimental results, single edge scratches are more efficient cutting while multiple edge scratches give more ploughing actions, which consume energy with little contribution to materials removal. The results provided an important insight of material removal during grinding process.
sci-hub.se 参考文章(14)
Michael Klecka, Ghatu Subhash, Grain size dependence of scratch-induced damage in alumina ceramics Wear. ,vol. 265, pp. 612- 619 ,(2008) , 10.1016/J.WEAR.2007.12.012
Vijayender Singh, P. Venkateswara Rao, S. Ghosh, Development of specific grinding energy model International Journal of Machine Tools & Manufacture. ,vol. 60, pp. 1- 13 ,(2012) , 10.1016/J.IJMACHTOOLS.2011.11.003
R. Komanduri, S. Varghese, N. Chandrasekaran, On the mechanism of material removal at the nanoscale by cutting Wear. ,vol. 269, pp. 224- 228 ,(2010) , 10.1016/J.WEAR.2010.03.024
E. Brinksmeler, A. Glwerzew, Chip Formation Mechanisms in Grinding at Low Speeds CIRP Annals. ,vol. 52, pp. 253- 258 ,(2003) , 10.1016/S0007-8506(07)60578-2
D. Anderson, A. Warkentin, R. Bauer, Novel Experimental Method to Determine the Cutting Effectiveness of Grinding Grits Experimental Mechanics. ,vol. 51, pp. 1535- 1543 ,(2011) , 10.1007/S11340-011-9471-6
Weibin Gu, Zhenqiang Yao, Xinguang Liang, Material removal of optical glass BK7 during single and double scratch tests Wear. ,vol. 270, pp. 241- 246 ,(2011) , 10.1016/J.WEAR.2010.10.064
T. Matsuo, S. Toyoura, E. Oshima, Y. Ohbuchi, Effect of Grain Shape on Cutting Force in Superabrasive Single-Grit Tests CIRP Annals. ,vol. 38, pp. 323- 326 ,(1989) , 10.1016/S0007-8506(07)62714-0
R. Komanduri, Some aspects of machining with negative rake tools simulating grinding International Journal of Machine Tool Design and Research. ,vol. 11, pp. 223- 233 ,(1971) , 10.1016/0020-7357(71)90027-8
Hong Wang, Ghatu Subhash, Abhijit Chandra, Characteristics of single-grit rotating scratch with a conical tool on pure titanium Wear. ,vol. 249, pp. 566- 581 ,(2001) , 10.1016/S0043-1648(01)00585-3
D A Doman, R Bauer, A Warkentin, Experimentally validated finite element model of the rubbing and ploughing phases in scratch tests Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 223, pp. 1519- 1527 ,(2009) , 10.1243/09544054JEM1520