Effect of corrosion degradation on ultimate strength of steel box girders

作者: S Saad-Eldeen , Y Garbatov , C Guedes Soares

DOI: 10.1179/1743278212Y.0000000005

关键词:

摘要: … After corrosion, the box girder sections were tested under four… sector should be at least proportional to the reduction in the … and the ultimate moment up to the proportional limit is ∼23% ( …

参考文章(42)
RE. Melchers, Modeling of Marine Corrosion of Steel Specimens Corrosion Testing in Natural Waters: Second Volume. pp. 20- 20 ,(1997) , 10.1520/STP11356S
C. Guedes Soares, Y. Garbatov, Reliability of Maintained Ship Hulls Subjected to Corrosion Journal of Ship Research. ,vol. 40, pp. 235- 243 ,(1996) , 10.5957/JSR.1996.40.3.235
Duo Ok, Yongchang Pu, Atilla Incecik, Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression Marine Structures. ,vol. 20, pp. 100- 114 ,(2007) , 10.1016/J.MARSTRUC.2007.02.003
Xiaoli Jiang, C. Guedes Soares, Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads Marine Structures. ,vol. 26, pp. 27- 41 ,(2012) , 10.1016/J.MARSTRUC.2011.12.005
C. Guedes Soares, Y. Garbatov, A. Zayed, G. Wang, Influence of environmental factors on corrosion of ship structures in marine atmosphere Corrosion Science. ,vol. 51, pp. 2014- 2026 ,(2009) , 10.1016/J.CORSCI.2009.05.028
C. Guedes Soares, Uncertainty modelling in plate buckling Structural Safety. ,vol. 5, pp. 17- 34 ,(1988) , 10.1016/0167-4730(88)90003-3
Tatsuro Nakai, Hisao Matsushita, Norio Yamamoto, Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending Journal of Marine Science and Technology. ,vol. 11, pp. 52- 64 ,(2006) , 10.1007/S00773-005-0203-4
Yan Jenny Lu, Youl-Nan Chen, Pao-Lin Tan, Yong Bai, Prediction of most probable extreme values for jackup dynamic analysis Marine Structures. ,vol. 15, pp. 15- 34 ,(2002) , 10.1016/S0951-8339(01)00017-X