Effect of Cr and Zr on the Tensile Creep Behavior of Al-5Fe Based Semisolid Alloys
作者： Bo Liu
DOI: 10.1007/S11837-018-3110-Y
关键词:
摘要: Determining the dominant creep mechanism is key feature for design and development of Al-Fe alloys. The tensile behavior Al5Fe4Cu2ZnMnMg alloy (AF1) Al5Fe4Cu2CrZnZrMnMg (AF15) by prepared semisolid forming has been investigated. results reveal that steady-state rates AF1 AF15 alloys are increased with increasing temperature applied stress. property slightly higher than alloy. There threshold stress during creep. true exponent close to 5. controlled lattice diffusion aluminum. resistance significantly improved adding a small amount Cr Zr elements reasons life discussed.
springer.com
harvard.edu
sci-hub.se 参考文章(20)
Huang Hongjun, Liu Bo, Yuan Xiaoguang, Microstructure and mechanical properties of hypereutectic Al-Fe alloys prepared by semi-solid formation China Foundry. ,vol. 8, pp. 424- 431 ,(2011)
Jun-Shan Zhang, None, High Temperature Deformation and Fracture of Materials ,(2010)
Xiao-yuan ZHANG, Hui ZHANG, Xiang-xin KONG, Ding-fa FU, Microstructure and properties of Al–0.70Fe–0.24Cu alloy conductor prepared by horizontal continuous casting and subsequent continuous extrusion forming Transactions of Nonferrous Metals Society of China. ,vol. 25, pp. 1763- 1769 ,(2015) , 10.1016/S1003-6326(15)63781-5
Michael E. Kassner, Fundamentals of Creep in Metals and Alloys ,(2004)
F. CARRENO, M. EDDAHBI, O. A. RUANO, Creep behaviour of three dispersion-strengthened Al-Fe-V-Si materials Journal of Materials Science Letters. ,vol. 16, pp. 1728- 1730 ,(1997) , 10.1023/A:1018563106432
K. Kuchařová, S.J. Zhu, J. Čadek, Creep in ODS copper reinforced with alumina short fibres—DRS copper Materials Science and Engineering: A. ,vol. 355, pp. 267- 276 ,(2003) , 10.1016/S0921-5093(03)00081-9
Bo Liu, Xiao-Guang Yuan, Hong-Jun Huang, Zhiqiang Guo, The Effect of Alloying Elements on the Microstructure of Al-5Fe Alloys JOM. ,vol. 64, pp. 316- 322 ,(2012) , 10.1007/S11837-012-0244-1
A. Benghalem, C. Biselli, D. G. Morris, Processing and properties of ultrafine laminated and fibre reinforced ductile in situ composites Materials Science and Technology. ,vol. 14, pp. 527- 530 ,(1998) , 10.1179/MST.1998.14.6.527
P. Schwaab, De Ferri Metallographia. Bd. V „Fraktographie und Mikrofraktographie”︁. Von G. Henry und D. Horstmann. Verlag Stahleisen mbH, Düsseldorf 1979, 445 S., 60 Strichzeichnungen, 138 Bildtafeln, 265 Zitate, DM 240,– Materials and Corrosion-werkstoffe Und Korrosion. ,vol. 30, pp. 836- 836 ,(1979) , 10.1002/MACO.19790301119
J. Weertman, Steady‐State Creep through Dislocation Climb Journal of Applied Physics. ,vol. 28, pp. 362- 364 ,(1957) , 10.1063/1.1722747