Study of effective parameters on wear behavior of rubbers based on statistical methods
作者： Ferial Hakami , Alokesh Pramanik , Nazrul Islam , Animesh Basak , Nigel Ridgway
DOI: 10.1002/PAT.4574
关键词:
摘要: This study investigates the wear, surface roughness, and temperature buildup (TBU) of styrene butadiene rubber (SBR), natural rubber (NR), and nitrile butadiene rubber (NBR) while …
sci-hub.se 参考文章(40)
Mahdi Alajmi, Abdullah Shalwan, Correlation between Mechanical Properties with Specific Wear Rate and the Coefficient of Friction of Graphite/Epoxy Composites. Materials. ,vol. 8, pp. 4162- 4175 ,(2015) , 10.3390/MA8074162
E. ZDRAVECKÁ, J. TKÁČOVÁ, M. ONDÁČ, Effect of microstructure factors on abrasion resistance of high-strength steels. Research in Agricultural Engineering. ,vol. 60, pp. 115- 120 ,(2018) , 10.17221/20/2013-RAE
Erol Feyzullahoğlu, Abrasive wear, thermal and viscoelastic behaviors of rubber seal materials used in different working conditions Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ,vol. 229, pp. 64- 73 ,(2015) , 10.1177/1350650114541750
B N J Persson, Rubber friction: role of the flash temperature Journal of Physics: Condensed Matter. ,vol. 18, pp. 7789- 7823 ,(2006) , 10.1088/0953-8984/18/32/025
Yoshihide Fukahori, Hirotaka Yamazaki, Mechanism of rubber abrasion part 3: how is friction linked to fracture in rubber abrasion? Wear. ,vol. 188, pp. 19- 26 ,(1995) , 10.1016/0043-1648(94)06571-3
Hemanth Rajashekaraiah, Sekar Mohan, Pramoda Kumari Pallathadka, Suresha Bhimappa, Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites Advances in Tribology. ,vol. 2014, pp. 1- 14 ,(2014) , 10.1155/2014/210187
L. Zsidai, P. Samyn, K. Vercammen, K. Van Acker, M. Kozma, G. Kalácska, P. De Baets, Friction and thermal effects of engineering plastics sliding against steel and DLN-coated counterfaces Tribology Letters. ,vol. 17, pp. 269- 288 ,(2004) , 10.1023/B:TRIL.0000032453.09366.D4
Gabriel Fedorko, Vieroslav Molnar, Daniela Marasova, Anna Grincova, Miroslav Dovica, Jozef Zivcak, Teodor Toth, Nikoleta Husakova, None, Failure analysis of belt conveyor damage caused by the falling material. Part I: Experimental measurements and regression models Engineering Failure Analysis. ,vol. 36, pp. 30- 38 ,(2014) , 10.1016/J.ENGFAILANAL.2013.09.017
Kilwon Cho, Daeho Lee, Effect of molecular weight between cross-links on the abrasion behavior of rubber by a blade abrader Polymer. ,vol. 41, pp. 133- 140 ,(2000) , 10.1016/S0032-3861(99)00111-1
D.V. De Pellegrin, A.A. Torrance, E. Haran, Wear mechanisms and scale effects in two-body abrasion Wear. ,vol. 266, pp. 13- 20 ,(2009) , 10.1016/J.WEAR.2008.05.015