Strain rate and temperature effect on mechanical properties and failure of 3D needle-punched Carbon/Carbon composites under dynamic loading
作者： Dian-sen Li , Hong-Wei Duan , Wei Wang , Dong-yun Ge , Lei Jiang
DOI: 10.1016/J.COMPSTRUCT.2016.11.082
关键词:
摘要: … and loading mode on the properties and failure modes of … properties increase as temperature rises is mainly caused by … bonding strength due to the high temperature thermal …
sci-hub.se 参考文章(28)
Dian-sen Li, Hao-ran Chen, Dong-yun Ge, Nan Jiang, Lei Jiang, Split Hopkinson pressure bar testing of 3D multi-axial warp knitted carbon/epoxy composites Composites Part B-engineering. ,vol. 79, pp. 692- 705 ,(2015) , 10.1016/J.COMPOSITESB.2015.04.045
Alma L. Leanos, Pavana Prabhakar, Experimental investigation of thermal shock effects on carbon–carbon composites Composite Structures. ,vol. 132, pp. 372- 383 ,(2015) , 10.1016/J.COMPSTRUCT.2015.05.038
Marc André Meyers, Dynamic Behavior of Materials ,(1994)
Jie Chen, Peng Xiao, Xiang Xiong, The mechanical properties and thermal conductivity of carbon/carbon composites with the fiber/matrix interface modified by silicon carbide nanofibers Materials & Design. ,vol. 84, pp. 285- 290 ,(2015) , 10.1016/J.MATDES.2015.06.085
T Gómez-del Río, E Barbero, Ramón Zaera, C Navarro, Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar Composites Science and Technology. ,vol. 65, pp. 61- 71 ,(2005) , 10.1016/J.COMPSCITECH.2004.06.004
A.P. Mouritz, Compression properties of z-pinned composite laminates Composites Science and Technology. ,vol. 67, pp. 3110- 3120 ,(2007) , 10.1016/J.COMPSCITECH.2007.04.017
Tao Suo, Xueling Fan, Guangli Hu, Yulong Li, Zhongbin Tang, Pu Xue, Compressive behavior of C/SiC composites over a wide range of strain rates and temperatures Carbon. ,vol. 62, pp. 481- 492 ,(2013) , 10.1016/J.CARBON.2013.06.044
Q BING, C SUN, Modeling and testing strain rate-dependent compressive strength of carbon/epoxy composites Composites Science and Technology. ,vol. 65, pp. 2481- 2491 ,(2005) , 10.1016/J.COMPSCITECH.2005.06.012
A. Nanayakkara, S. Feih, A.P. Mouritz, Experimental analysis of the through-thickness compression properties of z-pinned sandwich composites Composites Part A-applied Science and Manufacturing. ,vol. 42, pp. 1673- 1680 ,(2011) , 10.1016/J.COMPOSITESA.2011.07.020
Songwon Seo, Oakkey Min, Hyunmo Yang, Constitutive equation for Ti–6Al–4V at high temperatures measured using the SHPB technique International Journal of Impact Engineering. ,vol. 31, pp. 735- 754 ,(2005) , 10.1016/J.IJIMPENG.2004.04.010