Metallic 3-D Printed Rectangular Waveguides for Millimeter-Wave Applications
作者： Bing Zhang , Herbert Zirath
DOI: 10.1109/TCPMT.2016.2550483
关键词:
摘要: This paper explores the potential of metallic 3-D printing technology for millimeter-wave (mmWave) applications. It uses selective laser melting (SLM) to melt Cu-15Sn powder layer by build up rectangular waveguides at $E$ - (60–90 GHz), $D$ (110–170 and $H$ -band (220–325 GHz). Different from nonmetallic printed waveguides, SLM are once in a whole piece. Postelectroplating assembling not necessary. Besides, waveguide also outperforms mechanical robustness. Compared with commercial demonstrate comparable performance averaged dissipative attenuation 7.51 dB/m 7.76 50- 100-mm respectively. The is acceptable -band. We prove mmWave applications both prototyping mass production.
chalmers.se
sci-hub.se 参考文章(18)
S. Scott Crump, Modeling apparatus for three-dimensional objects ,(1992)
Hod Lipson, Melba Kurman, Fabricated: The New World of 3D Printing John Wiley & Sons. ,(2013)
Brent Stucker, Ian Gibson, David W. Rosen, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing ,(2009)
Mario D'Auria, William J. Otter, Jonathan Hazell, Brendan T. W. Gillatt, Callum Long-Collins, Nick M. Ridler, Stepan Lucyszyn, 3-D Printed Metal-Pipe Rectangular Waveguides IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 5, pp. 1339- 1349 ,(2015) , 10.1109/TCPMT.2015.2462130
Charles W. Hull, Apparatus for production of three-dimensional objects by stereolithography United States Patent, Appl., No. 638905, Filed. ,(1984)
Jia-Chi Samuel Chieh, Brian Dick, Stuart Loui, John D. Rockway, Development of a Ku-Band Corrugated Conical Horn Using 3-D Print Technology IEEE Antennas and Wireless Propagation Letters. ,vol. 13, pp. 201- 204 ,(2014) , 10.1109/LAWP.2014.2301169
Payam Nayeri, Min Liang, Rafael Austreberto Sabory-Garcia, Mingguang Tuo, Fan Yang, Michael Gehm, Hao Xin, Atef Z. Elsherbeni, 3D Printed Dielectric Reflectarrays: Low-Cost High-Gain Antennas at Sub-Millimeter Waves IEEE Transactions on Antennas and Propagation. ,vol. 62, pp. 2000- 2008 ,(2014) , 10.1109/TAP.2014.2303195
Koen Van Caekenberghe, Philip Bleys, Tom Craeghs, Marco Pelk, Simon Van Bael, A W‐band waveguide fabricated using selective laser melting Microwave and Optical Technology Letters. ,vol. 54, pp. 2572- 2575 ,(2012) , 10.1002/MOP.27121
C.R. Garcia, R.C. Rumpf, H.H. Tsang, J.H. Barton, Effects of extreme surface roughness on 3D printed horn antenna Electronics Letters. ,vol. 49, pp. 734- 736 ,(2013) , 10.1049/EL.2013.1528
Min Liang, Wei-Ren Ng, Kihun Chang, Kokou Gbele, Michael E. Gehm, Hao Xin, A 3-D Luneburg Lens Antenna Fabricated by Polymer Jetting Rapid Prototyping IEEE Transactions on Antennas and Propagation. ,vol. 62, pp. 1799- 1807 ,(2014) , 10.1109/TAP.2013.2297165