摘要:
sci-hub.se 参考文章(32)
O. Suchsland, Hong Xu, A simulation of the horizontal density distribution in a flakeboard Forest Products Journal. ,vol. 39, pp. 29- 33 ,(1989)
F. A. Kamke, D. A. Dillard, M. P. Wolcott, Fundamentals of flakeboard manufacture: viscoelastic behavior of the wood component. Wood and Fiber Science. ,vol. 22, pp. 345- 361 ,(1990)
Siqun Wang, Bobby L. Bledsoe, Paul M. Winistorfer, William W. Moschler, Esteavo DePaula, Fundamentals of vertical density profile formation in wood composites. Part I. In-situ density measurement of the consolidation process. Wood and Fiber Science. ,vol. 32, pp. 209- 219 ,(2000)
Lennart Salm�n, Viscoelastic properties ofin situ lignin under water-saturated conditions Journal of Materials Science. ,vol. 19, pp. 3090- 3096 ,(1984) , 10.1007/BF01026988
Frederick A. Kamke, Harrison Sizemore, Viscoelastic thermal compression of wood New technologies and materials in industries based on the forestry sector. Proceedings of the 18th International Scientific Conference, Zagreb, Croatia, 19 October 2007. pp. 73- 76 ,(2004)
Heiko Thoemen, Philip E. Humphrey, Modeling the physical processes relevant during hot pressing of wood-based composites. Part I. Heat and mass transfer European Journal of Wood and Wood Products. ,vol. 64, pp. 1- 10 ,(2006) , 10.1007/S00107-005-0027-2
Siqun Wang, Paul M. Winistorfer, Consolidation of flakeboard mats under theoretical laboratory pressing and simulated industrial pressing Wood and Fiber Science. ,vol. 32, pp. 527- 538 ,(2000)
A.J. Bolton, P.E. Humphrey, P.K. Kavvouras, The Hot Pressing of Dry-formed Wood-based Composites - Part VI. The Importance of Stresses in the Pressed Mattress and their Relevance to the Minimisation of Pressing Time, and the Variability of Board Properties Holzforschung. ,vol. 43, pp. 406- 410 ,(1989) , 10.1515/HFSG.1989.43.6.406
Pellegrino Musto, Simona Tavone, Gaetano Guerra, Claudio De Rosa, Evaluation by Fourier Transform Infrared Spectroscopy of the different crystalline forms in syndiotactic polystyrene samples Journal of Polymer Science Part B. ,vol. 35, pp. 1055- 1066 ,(1997) , 10.1002/(SICI)1099-0488(199705)35:7<1055::AID-POLB5>3.0.CO;2-V
P.E. Humphrey, The Hot Pressing of Dry-formed Wood-based Composites. Part II. A Simulation Model for Heat and Moisture Transfer, and Typical Results Holzforschung. ,vol. 43, pp. 199- 206 ,(1989) , 10.1515/HFSG.1989.43.3.199