Influence of tempering temperature on stability of carbide phases in 2.6cr-0.7mo-0.3v steel with various carbon content
作者： J. Janovec , A. Vyrostkova , M. Svoboda
DOI: 10.1007/BF02647972
关键词:
摘要: The present work evaluates the influence of bulk carbon content (0.1, 0.006, and 0.005 wt pct) tempering temperature (823, 853, 913 K) on stability, chemical composition, size carbide particles in 540 ks tempered states 2.6Cr-0.7Mo-0.3V steel. scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy (STEM/EDXS) diffraction methods were used to analyze particles. A characteristic energy-dispersive (EDX) spectrum can be attributed each identified carbides. MC is stable all experimental states. phase stability Fe-Cr-rich carbides increased order e, Fe3C → M3C M7C3, with increasing. In steels higher at low temperature, M23C6 was also noted. Mo2C M6C not observed. It shown that decrease has same phases as increase vanadium unchanged Cr, Mo, C contents temperature. Similarly, Cr V, contents.
springer.com
harvard.edu
sci-hub.se 参考文章(10)
R. A. Swift, Research on Chrome-Moly Steels Journal of Pressure Vessel Technology-transactions of The Asme. ,vol. 107, pp. 98- 99 ,(1985) , 10.1115/1.3264417
B.A. Senior, A critical review of precipitation behaviour in 1CrMoV rotor steels Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 103, pp. 263- 271 ,(1988) , 10.1016/0025-5416(88)90516-2
John Pilling, N. Ridley, Tempering of 2.25 Pct Cr-1 Pct Mo Low Carbon Steels Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 13, pp. 557- 563 ,(1982) , 10.1007/BF02644419
Abdel-Monem Elrakayby, B. Mills, Identification of carbides in high-speed steels Journal of Materials Science Letters. ,vol. 5, pp. 332- 334 ,(1986) , 10.1007/BF01748096
J. Janovec, A. V�rostkov�, A. Hol�, Effect of tempering on development of carbide particles in 2.7Cr-0.6Mo-0.3V steel Journal of Materials Science. ,vol. 27, pp. 6564- 6572 ,(1992) , 10.1007/BF01165937
T. George, E. R. Parker, R. O. Ritchie, Susceptibility to hydrogen attack of a thick-section 3Cr–1 Mo–1 Ni pressure-vessel steel-role of cooling rate Materials Science and Technology. ,vol. 1, pp. 198- 208 ,(1985) , 10.1179/MST.1985.1.3.198
K.H. Kuo, C.L. Jia, Crystallography of M23C6 and M6C precipitated in a low alloy steel Acta Metallurgica. ,vol. 33, pp. 991- 996 ,(1985) , 10.1016/0001-6160(85)90193-2
R.A. Stevens, P.E.J. Flewitt, The effect of phosphorus on the microstructure and creep properties of 214%Cr1%Mo steel Acta Metallurgica. ,vol. 34, pp. 849- 866 ,(1986) , 10.1016/0001-6160(86)90059-3
Ruth Petri, Ekkehard Schnabel, Paul Schwaab, Chemische Zusammensetzung und Kristallstruktur von Sondercarbiden in warmfesten Cr-Mo- und Cr-Mo-V-Stählen Archiv für das Eisenhüttenwesen. ,vol. 52, pp. 71- 76 ,(1981) , 10.1002/SRIN.198104898
Jin Yu, C. J. McMahon, The effects of composition and carbide precipitation on temper embrittlement of 2.25 Cr-1 Mo steel: Part I. Effects of P and Sn Metallurgical Transactions A. ,vol. 11, pp. 277- 289 ,(1980) , 10.1007/BF02660632