RETRACTED ARTICLE: Parameters Controlling the Impact Toughness of A356.2 Cast Alloy

作者： A. M. Samuel , H. W. Doty , S. Valtierra , F. H. Samuel

DOI: 10.1007/S40962-017-0141-Z

关键词:

摘要:

springer.com 本地加速

springer.com 本地加速

springer.com 本地加速

springer.com 本地加速

doi.org 本地加速

springer.com PDF 下载加速

sci-hub.se PDF 下载加速

参考文章(12)

X. CAO, J. CAMPBELL, OXIDE INCLUSION DEFECTS IN Al-Si-Mg CAST ALLOYS Canadian Metallurgical Quarterly. ,vol. 44, pp. 435- 448 ,(2005) , 10.1179/CMQ.2005.44.4.435

B. Suárez-Peña, J. Asensio-Lozano, Influence of Sr modification and Ti grain refinement on the morphology of Fe-rich precipitates in eutectic Al–Si die cast alloys Scripta Materialia. ,vol. 54, pp. 1543- 1548 ,(2006) , 10.1016/J.SCRIPTAMAT.2006.01.029

A.M.A. Mohamed, F.H. Samuel, A.M. Samuel, H.W. Doty, Influence of additives on the impact toughness of Al–10.8% Si near-eutectic cast alloys Materials & Design. ,vol. 30, pp. 4218- 4229 ,(2009) , 10.1016/J.MATDES.2009.04.041

Y Birol, Effect of silicon content in grain refining hypoeutectic Al–Si foundry alloys with boron and titanium additions Materials Science and Technology. ,vol. 28, pp. 385- 389 ,(2012) , 10.1179/1743284711Y.0000000049

F. H. Samuel, A. M. Samuel, P. Ouellet, H. W. Doty, Effect of Mg and Sr additions on the formation of intermetallics in Al-6 wt pct Si-3.5 wt pct Cu-(0.45) to (0.8) wt pct Fe 319-type alloys Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 29, pp. 2871- 2884 ,(1998) , 10.1007/S11661-998-0194-Y

J. Campbell, M. Tiryakioğlu, Review of effect of P and Sr on modification and porosity development in Al–Si alloys Materials Science and Technology. ,vol. 26, pp. 262- 268 ,(2010) , 10.1179/174328409X425227

Y.C. Lee, A.K. Dahle, D.H. StJohn, J.E.C. Hutt, The effect of grain refinement and silicon content on grain formation in hypoeutectic Al–Si alloys Materials Science and Engineering: A. ,vol. 259, pp. 43- 52 ,(1999) , 10.1016/S0921-5093(98)00884-3

N. Habibi, A.M. Samuel, F.H. Samuel, P. Rochette, D. Paquin, Effect of grain refining and Sr modification on Prefil measurement sensitivity in 356 alloys using electron probe microanalysis technique International Journal of Cast Metals Research. ,vol. 17, pp. 79- 87 ,(2004) , 10.1179/136404604225014837

Geoffrey K. Sigworth, Timothy A. Kuhn, Grain Refinement of Aluminum Casting Alloys International Journal of Metalcasting. ,vol. 1, pp. 31- 40 ,(2007) , 10.1007/BF03355416

Ossama Elsebaie, Fawzy H. Samuel, Saleh A. Alkahtani, Herbert W. Doty, Influence of Metallurgical Parameters on the Impact Toughness of Near Eutectic Al–Si Alloys International Journal of Metalcasting. ,vol. 10, pp. 276- 288 ,(2016) , 10.1007/S40962-016-0039-1