Influence of Thermal Exposure on the Microstructure, Surface Stability and Strength of a New Fe-Ni-Base Superalloy for A-USC Applications

作者: Zhi Hong Zhong , Yue Feng Gu , Yong Yuan , Zhan Shi , Yu Cheng Wu

DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.816.523

关键词:

摘要: A low-cost, high-creep strength wrought Fe‒Ni-base superalloy for 700 °C advanced ultra-supercritical coal-fired power plant applications has been developed. The microstructural stability of this alloy during long-term exposures at °C‒750 up to 10000 h was investigated by SEM and TEM. correlation between the microstructure evolution mechanical properties studied. experimental results showed that major precipitates in were spherical γ′, MC discrete M23C6 after exposure 750 no harmful phases, such as σ phase η phase, observed. amount increased with time while it decreased °C. During thermal γ′ coarsened increasing temperature. Alloy good oxidation resistance due formation external layer Cr2O3. yield first then °C, but gradually relationship dominant deformation mechanisms discussed.

参考文章(11)
I.S. Kim, B.G. Choi, H.U. Hong, J. Do, C.Y. Jo, Influence of thermal exposure on the microstructural evolution and mechanical properties of a wrought Ni-base superalloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 593, pp. 55- 63 ,(2014) , 10.1016/J.MSEA.2013.11.031
Shuangqun Zhao, Xishan Xie, Gaylord D. Smith, Shailesh J. Patel, Microstructural stability and mechanical properties of a new nickel-based superalloy Materials Science and Engineering: A. ,vol. 355, pp. 96- 105 ,(2003) , 10.1016/S0921-5093(03)00051-0
J.S. Hou, J.T. Guo, Influence of thermal exposure on the microstructures and mechanical properties of a superalloy Journal of Materials Engineering and Performance. ,vol. 15, pp. 67- 75 ,(2006) , 10.1361/105994906X83501
Jun-Hak Oh, In-Chul Choi, Yong-Jae Kim, Byung-Gil Yoo, Jae-il Jang, Variations in overall- and phase-hardness of a new Ni-based superalloy during isothermal aging Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 6121- 6127 ,(2011) , 10.1016/J.MSEA.2011.03.115
K. Bhanu Sankara Rao, V. Seetharaman, S.L. Mannan, P. Rodriguez, Effect of long-term exposure at elevated temperatures on the structure and properties of a nimonic PE 16 superalloy Materials Science and Engineering. ,vol. 58, pp. 93- 106 ,(1983) , 10.1016/0025-5416(83)90140-4
I.M. Lifshitz, V.V. Slyozov, The kinetics of precipitation from supersaturated solid solutions Journal of Physics and Chemistry of Solids. ,vol. 19, pp. 35- 50 ,(1961) , 10.1016/0022-3697(61)90054-3
Bernd Reppich, Peter Schepp, Günter Wehner, Some new aspects concerning particle hardening mechanisms in γ' precipitating nickel-base alloys—II. Experiments Acta Metallurgica. ,vol. 30, pp. 95- 104 ,(1982) , 10.1016/0001-6160(82)90049-9
N.D. Evans, P.J. Maziasz, R.W. Swindeman, G.D. Smith, Microstructure and phase stability in INCONEL alloy 740 during creep Scripta Materialia. ,vol. 51, pp. 503- 507 ,(2004) , 10.1016/J.SCRIPTAMAT.2004.05.047