Thermal stresses and their implication on cracking during laser melting of ceramic materials
作者： J.F Li , L Li , F.H Stott
DOI: 10.1016/J.ACTAMAT.2004.06.005
关键词:
摘要: A three-dimensional mechanical finite element model has been developed to investigate thermal stresses and their implication on cracking during laser melting of ceramic materials. Special effort devoted the effects latent heat fusion fluid flow melt pool stresses. Results have indicated that, although trends in predicted maximum tensile with respect processing conditions are same, contours surfaces treated tracks significantly different for two simulation cases, using loads provided by models that either consider or neglect pool. Such simulated results can be reasonably correlated degree occurrence cracks morphologies experimentally formed, under corresponding conditions.
manchester.ac.uk
core.ac.uk
osti.gov
elsevier.com参考文章(24)
B. Glorieux, F. Millot, J. C. Rifflet, Surface Tension of Liquid Alumina from Contactless Techniques International Journal of Thermophysics. ,vol. 23, pp. 1249- 1257 ,(2002) , 10.1023/A:1019848405502
Louis G. Hector, Richard B. Hetnarski, Thermal Stresses in Materials Due to Laser Heating Thermal Stresses IV. pp. 453- 531 ,(1996) , 10.1016/B978-044481571-2/50006-6
W. Mark Rainforth, William E. Lee, Ceramic Microstructures: Property control by processing ,(1994)
John F. Ready, LIA handbook of Laser materials processing Laser Institute of America Magnolia. ,(2001)
K Dai, L Shaw, Thermal and stress modeling of multi-material laser processing Acta Materialia. ,vol. 49, pp. 4171- 4181 ,(2001) , 10.1016/S1359-6454(01)00312-3
Yuwen Zhang, A. Faghri, Vaporization, melting and heat conduction in the laser drilling process International Journal of Heat and Mass Transfer. ,vol. 42, pp. 1775- 1790 ,(1999) , 10.1016/S0017-9310(98)00268-3
L Bradley, L Li, F.H Stott, Flame-assisted laser surface treatment of refractory materials for crack-free densification Materials Science and Engineering: A. ,vol. 278, pp. 204- 212 ,(2000) , 10.1016/S0921-5093(99)00592-4
A. F. A. Hoadley, M. Rappaz, A thermal model of laser cladding by powder injection Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 23, pp. 631- 642 ,(1992) , 10.1007/BF02649723
C. Carmignani, R. Mares, G. Toselli, Transient finite element analysis of deep penetration laser welding process in a singlepass butt-welded thick steel plate Computer Methods in Applied Mechanics and Engineering. ,vol. 179, pp. 197- 214 ,(1999) , 10.1016/S0045-7825(99)00043-2
P. Tekriwal, J. Mazumder, Transient and Residual Thermal Strain-Stress Analysis of GMAW Journal of Engineering Materials and Technology-transactions of The Asme. ,vol. 113, pp. 336- 343 ,(1991) , 10.1115/1.2903415