Polyoxymethylene composites with natural and cellulose fibres: Toughness and heat deflection temperature
作者： Andrzej K. Bledzki , Abdullah A. Mamun , Maik Feldmann
DOI: 10.1016/J.COMPSCITECH.2012.08.004
关键词:
摘要: Abstract Cellulose and abaca fibre reinforced polyoxymethylene (POM) composites were fabricated using an extrusion coating (double screw) compounding followed by injection moulding. The long cellulose or fibres dried online with infrared dryer impregnated in matrix material a special die. loading was 30 wt.%. tensile properties, flexural Charpy impact strength, falling weight heat deflection temperature dynamic mechanical properties investigated for those composites. pull-outs, adhesion cracks scanning electron microscopy. It observed that the strength of found to reduce 18% increase 90% comparison control POM. 39% 144% fibre. Due addition both modulus 2-fold. notched 6-fold higher than maximum resistance force shorted out be 50 °C 63 °C POM respectively.
elsevier.com
sci-hub.se 参考文章(25)
Kuniaki Kawaguchi, Eiji Masuda, Yoshihisa Tajima, Tensile behavior of glass‐fiber‐filled polyacetal: Influence of the functional groups of polymer matrices Journal of Applied Polymer Science. ,vol. 107, pp. 667- 673 ,(2008) , 10.1002/APP.27143
H.-P Fink, P Weigel, H.J Purz, J Ganster, Structure formation of regenerated cellulose materials from NMMO-solutions Progress in Polymer Science. ,vol. 26, pp. 1473- 1524 ,(2001) , 10.1016/S0079-6700(01)00025-9
Byung-Dae Park, John J. Balatinecz, Effects of Impact Modification on the Mechanical Properties of Wood-Fiber Thermoplastic Composites with High Impact Polypropylene (HIPP) Journal of Thermoplastic Composite Materials. ,vol. 9, pp. 342- 364 ,(1996) , 10.1177/089270579600900404
Nina Graupner, Axel S. Herrmann, Jörg Müssig, Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas Composites Part A-applied Science and Manufacturing. ,vol. 40, pp. 810- 821 ,(2009) , 10.1016/J.COMPOSITESA.2009.04.003
T. Konaka, K. Nakagawa, S. Yamakawa, Mechanical and physical properties of ultraoriented polyoxymethylene produced by microwave heating drawing Polymer. ,vol. 26, pp. 462- 468 ,(1985) , 10.1016/0032-3861(85)90213-7
A OHLIN, L LINDER, Biocompatibility of polyoxymethylene [Delrin®] in bone Biomaterials. ,vol. 14, pp. 285- 289 ,(1993) , 10.1016/0142-9612(93)90120-Q
Chunguang Long, Manyu Hua, Study on POM Composites Modified by Ekonol and Lubricant Journal of Thermoplastic Composite Materials. ,vol. 18, pp. 381- 391 ,(2005) , 10.1177/0892705705051896
Chris DeArmitt, Understanding filler interactions improves impact resistance Plastics, Additives and Compounding. ,vol. 8, pp. 34- 39 ,(2006) , 10.1016/S1464-391X(06)70607-9
J. Horrion, S. Cartasegna, P. K. Agarwal, Morphology, thermal, and mechanical properties of polyacetal/ionomer blends Polymer Engineering and Science. ,vol. 36, pp. 2061- 2068 ,(1996) , 10.1002/PEN.10601
Andrzej K. Bledzki, Abdullah A. Mamun, Adam Jaszkiewicz, Karsten Erdmann, Polypropylene composites with enzyme modified abaca fibre Composites Science and Technology. ,vol. 70, pp. 854- 860 ,(2010) , 10.1016/J.COMPSCITECH.2010.02.003