Synthesis and compressive fracture behavior of a CuZr-based bulk amorphous alloy with Ti addition
作者： Ding Chen , Jian-feng Dong , Guo-zhi Ma
DOI: 10.1007/S11771-013-1595-7
关键词:
摘要: Cu46Zr46Al4.8Ti3.2 bulk metallic glass (BMG) was successfully synthesized by copper-mold casting and the mechanical properties at room temperature were measured compression tests. The structure thermal characteristics analyzed XRD DSC, fracture surface morphology examined SEM. glassy alloy with 4 mm in diameter shows an high strength of 1 960 MPa, improvement about 20% compared to ultimate Cu46Zr46Al8 BMG, which suggests that Ti addition improves strength. different degrees adiabatic heating induce four types features: a vein-like structure, elongated striated vein pattern, melting smooth regions. patterns as well region show enormous strain energy is released, causes significant heating. Furthermore, many micro-cracks observed are caused strong shear force. In addition, force leads bands lateral surface.
springer.com
sci-hub.se 参考文章(28)
Wei-Hua Wang, Chuang Dong, CH Shek, Bulk metallic glasses Materials Science & Engineering R-reports. ,vol. 44, pp. 45- 89 ,(2004) , 10.1016/J.MSER.2004.03.001
G.Y. Wang, P.K. Liaw, M.L. Morrison, Progress in studying the fatigue behavior of Zr-based bulk-metallic glasses and their composites Intermetallics. ,vol. 17, pp. 579- 590 ,(2009) , 10.1016/J.INTERMET.2009.01.017
Y.Q. Cheng, E. Ma, Atomic-level structure and structure–property relationship in metallic glasses Progress in Materials Science. ,vol. 56, pp. 379- 473 ,(2011) , 10.1016/J.PMATSCI.2010.12.002
Mingwei Chen, A brief overview of bulk metallic glasses NPG Asia Materials. ,vol. 3, pp. 82- 90 ,(2011) , 10.1038/ASIAMAT.2011.30
Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, H.F. Zhang, Effect of loading rate on failure in Zr-based bulk metallic glass Materials Science and Engineering: A. ,vol. 473, pp. 105- 110 ,(2008) , 10.1016/J.MSEA.2007.04.044
DW Xing, YJ Yang, J Shen, JF Sun, None, Compressive fracture behavior of Cu-based bulk amorphous alloys Materials Letters. ,vol. 62, pp. 44- 46 ,(2008) , 10.1016/J.MATLET.2007.04.073
Wei Hua Wang, The elastic properties, elastic models and elastic perspectives of metallic glasses Progress in Materials Science. ,vol. 57, pp. 487- 656 ,(2012) , 10.1016/J.PMATSCI.2011.07.001
Elena D. Tabachnikova, Vladimir Z. Bengus, J. Miskuf, Kornel Csach, Václav Ocelík, William L. Johnson, V. Molokanov, Low Temperature Ductile Shear Failure of Zr41.2Ti13.8Ni10Cu12.5Be22.5 and Cu50Zr35Ti8Hf5Ni2 Bulk Amorphous Alloys Materials Science Forum. ,vol. 343-346, pp. 197- 202 ,(2000) , 10.4028/WWW.SCIENTIFIC.NET/MSF.343-346.197
ZhenHua Chen, LiKe Zhang, JiZi Liu, Ding Chen, Cryogenic treatment induced hardening for Cu-Zr-Ag-Al bulk metallic glasses Science China Technological Sciences. ,vol. 56, pp. 637- 641 ,(2013) , 10.1007/S11431-012-5107-Z
Toni Feder, Axe hangs over RHIC Physics Today. ,vol. 66, pp. 32- 32 ,(2013) , 10.1063/PT.3.1914