摘要: … to use new materials with commercial 3D printers, … 3D printers are capable of printing structures with more than one function, this Review specifically focuses on multiprocess 3D printing …
sciencemag.org参考文章(63)
Misael Navarrete, Amit Lopes, Eric MacDonald, Raul Estrada, Jeremy Palmer, Ryan Wicker, Jacqueline Acuna, Integrated layered Manufacturing of a Novel Wireless Motion Sensor System with GPS. 18th Solid Freeform Fabrication Symposium, SFF 2007. ,(2007)
Matt Saari, Bryan Cox, Edmond Richer, Paul S. Krueger, Adam L. Cohen, Fiber Encapsulation Additive Manufacturing: An Enabling Technology for 3D Printing of Electromechanical Devices and Robotic Components 3D Printing and Additive Manufacturing. ,vol. 2, pp. 32- 39 ,(2015) , 10.1089/3DP.2015.0003
D. M. French, J. P. O'Loughlin, B. W. Hoff, S. Maestas, D. Lepell, T. Montoya, Dielectric strength testing of 3D printed plastics and application to a high voltage transformer pulser 2015 IEEE Pulsed Power Conference (PPC). pp. 1- 6 ,(2015) , 10.1109/PPC.2015.7296923
Ryan B. Wicker, Eric W. MacDonald, Multi-material, multi-technology stereolithography: This feature article covers a decade of research into tackling one of the major challenges of the stereolithography technique, which is including multiple materials in one construct Virtual and Physical Prototyping. ,vol. 7, pp. 181- 194 ,(2012) , 10.1080/17452759.2012.721119
Dan Qiu, Noshir A. Langrana, Void eliminating toolpath for extrusion‐based multi‐material layered manufacturing Rapid Prototyping Journal. ,vol. 8, pp. 38- 45 ,(2002) , 10.1108/13552540210413293
Timothy J. Horn, Ola L. A. Harrysson, Overview of current additive manufacturing technologies and selected applications. Science Progress. ,vol. 95, pp. 255- 282 ,(2012) , 10.3184/003685012X13420984463047
Jennifer A. Lewis, Bok Y. Ahn, Device fabrication: Three-dimensional printed electronics Nature. ,vol. 518, pp. 42- 43 ,(2015) , 10.1038/518042A
John P. Swensen, Lael U. Odhner, Brandon Araki, Aaron M. Dollar, Printing Three-Dimensional Electrical Traces in Additive Manufactured Parts for Injection of Low Melting Temperature Metals Journal of Mechanisms and Robotics. ,vol. 7, pp. 021004- ,(2015) , 10.1115/1.4029435
Brett P. Conner, Guha P. Manogharan, Ashley N. Martof, Lauren M. Rodomsky, Caitlyn M. Rodomsky, Dakesha C. Jordan, James W. Limperos, Making sense of 3-D printing: Creating a map of additive manufacturing products and services Additive manufacturing. ,vol. 1, pp. 64- 76 ,(2014) , 10.1016/J.ADDMA.2014.08.005
Jae-Won Choi, Eric MacDonald, Ryan Wicker, Multi-material microstereolithography. The International Journal of Advanced Manufacturing Technology. ,vol. 49, pp. 543- 551 ,(2010) , 10.1007/S00170-009-2434-8