Effect of water flow rate, casting speed, alloying elements and pull distance on tensile strength, elongation percentage and microstructure of continuous cast copper alloys
作者： Ehsaan-Reza Bagherian , Yongchang Fan , Mervyn Cooper , Brian Frame , Amin Abdolvand
关键词:
摘要: Most parameters that control the solidification of castings, and consequently, microstructure mechanical properties, are: chemical composition, liquid metal treatment, cooling rate temperature gradient. In this work, characterization influence water flow rate, casting speed, alloying element pull distance on tensile strength, elongation percentage continuous cast copper alloys has been carried out. A significant different in grain structure investigated it was also found these could improve physical properties samples. As a particular example, samples from 10% to 25%.
core.ac.uk
sci-hub.se 参考文章(12)
H. Sommerhofer, P. Sommerhofer, A New Continuous Casting Process Wiley‐VCH Verlag GmbH & Co. KGaA. pp. 368- 376 ,(2006) , 10.1002/9783527607969.CH49
Qing Liu Xiaofeng Zhang, Control Technology of Solidification and Cooling in the Process of Continuous Casting of Steel InTech. ,(2012) , 10.5772/51457
Adrian P. Mouritz, Introduction to Aerospace Materials ,(2012)
Dionysios Spathis, John Tsiros, The influence of casting speed in the as cast strip mechanical properties of 8079 and 8006 alloys Springer, Cham. pp. 305- 309 ,(2016) , 10.1007/978-3-319-65136-1_53
James M. Boileau, Jacob W. Zindel, John E. Allison, The Effect of Solidification Time on the Mechanical Properties in a Cast A356-T6 Aluminum Alloy SAE transactions. ,vol. 106, pp. 63- 74 ,(1997) , 10.4271/970019
Zhao Hui Wang, Yong Lin Kang, Wenchao Dong, Hongjin Zhao, Jin Wei Liu, Yue Xu, Study of Grain Refinement and SiC Nanoparticle Reinforced Magnesium Alloys Materials Science Forum. ,vol. 488-489, pp. 889- 892 ,(2005) , 10.4028/WWW.SCIENTIFIC.NET/MSF.488-489.889
E. Veleckis, A.G. Rogers, Decomposition pressure of hydrogen in the α and α + β phase fields of the TiH system Journal of the Less Common Metals. ,vol. 97, pp. 79- 90 ,(1984) , 10.1016/0022-5088(84)90011-0
N. H. Pryds, X. Huang, The effect of cooling rate on the microstructures formed during solidification of ferritic steel Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 31, pp. 3155- 3166 ,(2000) , 10.1007/S11661-000-0095-1
Naokuni Muramatsu, Hisamichi Kimura, Akihisa Inoue, Development and Microstructure of Cu–Zr Alloy Wire with Ultimate Tensile Strength of 2.2 GPa Materials Transactions. ,vol. 53, pp. 1062- 1068 ,(2012) , 10.2320/MATERTRANS.M2012064
Z. Mei, J. W. Morris, M. C. Shine, T. S. E. Summers, Effects of cooling rate on mechanical properties of near-eutectic tin-lead solder joints Journal of Electronic Materials. ,vol. 20, pp. 599- 608 ,(1991) , 10.1007/BF02669524