Effect of Cr content and heat-treatment on the high temperature strength of eutectic Al–Si alloys
作者： Yuying Yang , Sheng-Yi Zhong , Zhe Chen , Mingliang Wang , Naiheng Ma
DOI: 10.1016/J.JALLCOM.2015.05.167
关键词:
摘要: … Al-20 wt% Fe and Al-5 wt% Cr commercial master alloys were used to prepare the Al–Si eutectic alloy with element additions of Mg, Cu, Ni, Fe and Cr. The alloys were melted, and thus …
elsevier.com
sci-hub.se 参考文章(33)
B. Cantor, R. D. Doherty, J. W. Martin, Stability of microstructure in metallic systems ,(1976)
J. A. E. BELL, W. C. WINEGARD, Interconnexion of Silicon in Modified Aluminium–Silicon Eutectic Nature. ,vol. 208, pp. 177- 177 ,(1965) , 10.1038/208177A0
Meng Sha, Shusen Wu, Xingtao Wang, Li Wan, Effects of Co addition on Fe-bearing intermetallic compounds and mechanical properties of AlSi20Cu2Ni1Fe0.7–1 alloys Journal of Alloys and Compounds. ,vol. 551, pp. 468- 474 ,(2013) , 10.1016/J.JALLCOM.2012.10.181
Z. Asghar, G. Requena, Three dimensional post-mortem study of damage after compression of cast Al–Si alloys Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 591, pp. 136- 143 ,(2014) , 10.1016/J.MSEA.2013.10.067
Sergio Haro-Rodríguez, Rafael E. Goytia-Reyes, Dheerendra Kumar Dwivedi, Víctor H. Baltazar-Hernández, Horacio Flores-Zúñiga, María J. Pérez-López, On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al–Si–Mg alloy Materials & Design. ,vol. 32, pp. 1865- 1871 ,(2011) , 10.1016/J.MATDES.2010.12.012
L. Lasa, J. M. Rodriguez-Ibabe, Evolution of the main intermetallic phases in Al-Si-Cu-Mg casting alloys during solution treatment Journal of Materials Science. ,vol. 39, pp. 1343- 1355 ,(2004) , 10.1023/B:JMSC.0000013895.72084.C9
N.A. Belov, D.G. Eskin, N.N. Avxentieva, Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys Acta Materialia. ,vol. 53, pp. 4709- 4722 ,(2005) , 10.1016/J.ACTAMAT.2005.07.003
Muzaffer Zeren, The effect of heat-treatment on aluminum-based piston alloys Materials & Design. ,vol. 28, pp. 2511- 2517 ,(2007) , 10.1016/J.MATDES.2006.09.010
Yuanhua Cai, Ruiguang Liang, Longgang Hou, Jishan Zhang, Effect of Cr and Mn on the microstructure of spray-formed Al–25Si–5Fe–3Cu alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 4248- 4254 ,(2011) , 10.1016/J.MSEA.2011.02.029
S.G. Shabestari, The effect of iron and manganese on the formation of intermetallic compounds in aluminum–silicon alloys Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 383, pp. 289- 298 ,(2004) , 10.1016/J.MSEA.2004.06.022