Failure and damage tolerance aspects of railway components
作者： Uwe Zerbst , Stefano Beretta
DOI: 10.1016/J.ENGFAILANAL.2010.06.001
关键词:
摘要: Abstract Railway structures such as rails and axles are safety relevant components since any failure includes the risk of catastrophic derailment. This paper gives a brief overview on most important potential scenarios driven by fatigue crack initiation propagation discusses effects influencing factors vehicle weight speed, track quality environmental conditions. The present summarizes earlier work authors in this field.
core.ac.uk
elsevier.com
sci-hub.se 参考文章(24)
D. I. Fletcher, A. Kapoor, F. Schmid, MANAGING THE CRITICAL WHEEL/RAIL INTERFACE Railway Gazette international. ,vol. 158, ,(2002)
Andrea Carpinteri, Handbook of fatigue crack propagation in metallic structures Elsevier. ,(1994)
Anders Skyttebol, Continuous Welded Railway Rails: Residual Stress Analyses, Fatigue Assessments and Experiments Chalmers University of Technology. ,(2004)
J. W. Ringsber, B. L. Josefson, Finite element analyses of rolling contact fatigue crack initiation in railheads Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. ,vol. 215, pp. 243- 259 ,(2001) , 10.1243/0954409011531558
H DESIMONE, S BERETTA, Mechanisms of mixed mode fatigue crack propagation at rail butt-welds International Journal of Fatigue. ,vol. 28, pp. 635- 642 ,(2006) , 10.1016/J.IJFATIGUE.2005.07.044
Stefano Beretta, Uwe Zerbst, Damage tolerance of railway axles Engineering Fracture Mechanics. ,vol. 78, pp. 713- ,(2011) , 10.1016/J.ENGFRACMECH.2011.02.014
G. Donzella, M. Faccoli, A. Ghidini, A. Mazzù, R. Roberti, The competitive role of wear and RCF in a rail steel Engineering Fracture Mechanics. ,vol. 72, pp. 287- 308 ,(2005) , 10.1016/J.ENGFRACMECH.2004.04.011
R A Smith, S Hillmansen, A brief historical overview of the fatigue of railway axles Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. ,vol. 218, pp. 267- 277 ,(2004) , 10.1243/0954409043125932
S. Beretta, A. Ghidini, F. Lombardo, Fracture mechanics and scale effects in the fatigue of railway axles Engineering Fracture Mechanics. ,vol. 72, pp. 195- 208 ,(2005) , 10.1016/J.ENGFRACMECH.2003.12.011
U. Zerbst, R. Lundén, K.-O. Edel, R.A. Smith, Introduction to the damage tolerance behaviour of railway rails – a review Engineering Fracture Mechanics. ,vol. 76, pp. 2563- 2601 ,(2009) , 10.1016/J.ENGFRACMECH.2009.09.003