Modeling of fluidized bed combustion processes
作者： D. Pallarès , F. Johnsson
DOI: 10.1533/9780857098801.2.524
关键词:
摘要: This chapter provides an overview of the aims, principles, and limitations different types modeling used for fluidized bed combustion (FBC) systems with a focus on macroscopic modeling, which is currently considered most suitable approach FBC units industrial scale. Sub-models regions characterizing are described, emphasis critical in-furnace phenomena. Guidelines examples given how sub-models can be linked into comprehensive process model units.
chalmers.se
elsevier.com
sci-hub.se 参考文章(118)
S. Ergun, Fluid flow through packed columns Chem. Eng. Prog.. ,vol. 48, pp. 89- 94 ,(1952)
S.T. Pemberton, J.F. Davidson, Turbulence in the freeboard of a gas-fluidised bed Chemical Engineering Science. ,vol. 39, pp. 829- 840 ,(1984) , 10.1016/0009-2509(84)85052-6
CM van den Bleek, A Marzocchella, RC Zijerveld, JC Jaap Schouten, F Johnsson, A Koniuta, Axial solids distribution and bottom bed dynamics of circulating fluidized bed combustor application AIChE Symposium Series. ,vol. 93, pp. 97- 102 ,(1997)
Riccardo Chirone, Piero Salatino, Fabrizio Scala, The relevance of attrition to the fate of ashes during fluidized-bed combustion of a biomass Proceedings of the Combustion Institute. ,vol. 28, pp. 2279- 2286 ,(2000) , 10.1016/S0082-0784(00)80638-4
I. Eames, M.A. Gilbertson, Mixing and drift in gas-fluidised beds Powder Technology. ,vol. 154, pp. 185- 193 ,(2005) , 10.1016/J.POWTEC.2005.04.036
Riccardo Chirone, Francesco Miccio, Fabrizio Scala, On the Relevance of Axial and Transversal Fuel Segregation during the FB Combustion of a Biomass Energy & Fuels. ,vol. 18, pp. 1108- 1117 ,(2004) , 10.1021/EF034084J
Allan S Issangya, John R Grace, Dingrong Bai, Jingxu Zhu, None, Further measurements of flow dynamics in a high-density circulating fluidized bed riser Powder Technology. ,vol. 111, pp. 104- 113 ,(2000) , 10.1016/S0032-5910(00)00246-1
F. Hernández-Jiménez, S. Sánchez-Delgado, A. Gómez-García, A. Acosta-Iborra, Comparison between two-fluid model simulations and particle image analysis & velocimetry (PIV) results for a two-dimensional gas–solid fluidized bed Chemical Engineering Science. ,vol. 66, pp. 3753- 3772 ,(2011) , 10.1016/J.CES.2011.04.026
P.A. Olowson, A.E. Almstedt, Influence of pressure and fluidization velocity on the bubble behaviour and gas flow distribution in a fluidized bed Chemical Engineering Science. ,vol. 45, pp. 1733- 1741 ,(1990) , 10.1016/0009-2509(90)87051-S
T. B. Anderson, Roy Jackson, Fluid Mechanical Description of Fluidized Beds. Equations of Motion Industrial & Engineering Chemistry Fundamentals. ,vol. 6, pp. 527- 539 ,(1967) , 10.1021/I160024A007