High-temperature sliding wear resistance of a ductile metal-toughened Cr13Ni5Si2 ternary metal silicide alloy
作者： Y.L. Fang , H.M. Wang
DOI: 10.1016/J.JALLCOM.2006.06.033
关键词:
摘要: Abstract High-temperature metallic sliding wear resistance and mechanisms of a Cr 13 Ni 5 Si 2 ternary metal silicide alloy toughened by small amount interdendritic nickel-based solid solution (γ) were studied as function test temperature. The γ-toughened has excellent under high-temperature conditions. Wear volume loss the was very low even slightly decreased with increasing ductile γ-phase played positive role in reducing prohibiting crack propagation preventing pulling-out broken fragments from worn surface.
elsevier.com
sci-hub.se 参考文章(25)
Yoshinao Mishima, Masaharu Kato, Yoshisato Kimura, Hideki Hosoda, Seiji Miura, Improvement in room temperature ductility of intermetallic alloys through microstructural control Intermetallics. ,vol. 4, pp. S171- S179 ,(1996) , 10.1016/0966-9795(96)00033-7
C Rincón, J Romero, J Esteve, E Martı́nez, A Lousa, Effects of carbon incorporation in tungsten carbide films deposited by r.f. magnetron sputtering: single layers and multilayers Surface & Coatings Technology. ,vol. 163, pp. 386- 391 ,(2003) , 10.1016/S0257-8972(02)00635-7
Y. Chen, H.M. Wang, High-temperature wear resistance of a laser clad TiC reinforced FeAl in situ composite coating Surface & Coatings Technology. ,vol. 179, pp. 252- 256 ,(2004) , 10.1016/S0257-8972(03)00821-1
X.D Lu, H.M Wang, High-temperature sliding wear behaviors of laser clad Mo2Ni3Si/NiSi metal silicide composite coatings Applied Surface Science. ,vol. 214, pp. 190- 195 ,(2003) , 10.1016/S0169-4332(03)00306-4
Hui Wang, Weiming Xia, Yuansheng Jin, A study on abrasive resistance of Ni-based coatings with a WC hard phase Wear. ,vol. 195, pp. 47- 52 ,(1996) , 10.1016/0043-1648(95)06762-0
Diana Farkas, Kevin Ternes, Atomistic study of the interaction of lattice vacancies with grain boundaries in Ni3Al Intermetallics. ,vol. 4, pp. 171- 177 ,(1996) , 10.1016/0966-9795(95)00044-5
S Isogawa, H Tojo, A Chayahara, Y Horino, Plasma based ion implantation technology for high-temperature oxidation-resistant surface coatings Surface & Coatings Technology. ,vol. 158, pp. 186- 192 ,(2002) , 10.1016/S0257-8972(02)00202-5
G Duan, H.M Wang, High-temperature wear resistance of a laser-clad γ/Cr3Si metal silicide composite coating Scripta Materialia. ,vol. 46, pp. 107- 111 ,(2002) , 10.1016/S1359-6462(01)01208-8
N.S Stoloff, C.T Liu, S.C Deevi, Emerging applications of intermetallics Intermetallics. ,vol. 8, pp. 1313- 1320 ,(2000) , 10.1016/S0966-9795(00)00077-7
L.Q. Zhang, H.M. Wang, High-temperature sliding wear resistance of a Cr3Si/Cr13Ni5Si2 multiphase intermetallic alloy Materials Letters. ,vol. 57, pp. 2710- 2715 ,(2003) , 10.1016/S0167-577X(02)01363-0