Flow Behavior of Composites of PA6/Kaolin Nanoparticles
作者： Chao Wang , Ying Chun Li , Guo Sheng Hu
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.703.45
关键词:
摘要: The blends of Nylon 6/Acrylonitrile-Butadiene-Styrene (ABS) with styrene-maleic anhydride (SMA) was prepared by melt blending as the compatilizer. Mechanical properties, dynamic mechanical analysis (DMA) and fracture appearances were determined. It found that impact tensile strength firstly increased then decreased along increase SMA content. properties reached maximum values when content 1.5%. results DMA scanning electron microscope (SEM) indicated addition can effectively enhance compatibility 6 ABS. Key words: 6, ABS, SMA, blends, modification
sci-hub.se 参考文章(13)
W.S. Chow, Z.A. Mohd Ishak, J. Karger-Kocsis, A.A. Apostolov, U.S. Ishiaku, Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/polypropylene/organoclay nanocomposites Polymer. ,vol. 44, pp. 7427- 7440 ,(2003) , 10.1016/J.POLYMER.2003.09.006
Xiaohui Liu, Qiuju Wu, Non-isothermal crystallization behaviors of polyamide 6/clay nanocomposites European Polymer Journal. ,vol. 38, pp. 1383- 1389 ,(2002) , 10.1016/S0014-3057(01)00304-4
Young-Cheol Ahn, D.R. Paul, Rubber toughening of nylon 6 nanocomposites Polymer. ,vol. 47, pp. 2830- 2838 ,(2006) , 10.1016/J.POLYMER.2006.02.074
A. Lazzeri, C.B. Bucknall, Applications of a dilatational yielding model to rubber-toughened polymers Polymer. ,vol. 36, pp. 2895- 2902 ,(1995) , 10.1016/0032-3861(95)94338-T
W.S. Chow, A. Abu Bakar, Z.A. Mohd Ishak, J. Karger-Kocsis, U.S. Ishiaku, Effect of maleic anhydride-grafted ethylene–propylene rubber on the mechanical, rheological and morphological properties of organoclay reinforced polyamide 6/polypropylene nanocomposites European Polymer Journal. ,vol. 41, pp. 687- 696 ,(2005) , 10.1016/J.EURPOLYMJ.2004.10.041
C.B. Bucknall, R.R. Smith, Stress-whitening in high-impact polystyrenes Polymer. ,vol. 6, pp. 437- 446 ,(1965) , 10.1016/0032-3861(65)90028-5
Seymour Newman, Stephen Strella, Stress—strain behavior of rubber-reinforced glassy polymers Journal of Applied Polymer Science. ,vol. 9, pp. 2297- 2310 ,(1965) , 10.1002/APP.1965.070090621
John D. Hoffman, James J. Weeks, X‐Ray Study of Isothermal Thickening of Lamellae in Bulk Polyethylene at the Crystallization Temperature The Journal of Chemical Physics. ,vol. 42, pp. 4301- 4302 ,(1965) , 10.1063/1.1695935
T.D. Fornes, D.R. Paul, Crystallization behavior of nylon 6 nanocomposites Polymer. ,vol. 44, pp. 3945- 3961 ,(2003) , 10.1016/S0032-3861(03)00344-6
Meng Feng, Fangling Gong, Chungui Zhao, Guangming Chen, Shimin Zhang, Mingshu Yang, Effect of clay on the morphology of blends of poly(propylene) and polyamide 6/clay nanocomposites Polymer International. ,vol. 53, pp. 1529- 1537 ,(2004) , 10.1002/PI.1593