Shear bond strength of a denture base acrylic resin and gingiva-colored indirect composite material to zirconia ceramics.
作者： Kei Kubochi , Futoshi Komine , Ryosuke Fushiki , Shogo Yagawa , Serina Mori
DOI: 10.1016/J.JPOR.2016.07.007
关键词:
摘要: Abstract Purpose To evaluate the shear bond strengths of two gingiva-colored materials (an indirect composite material and a denture base acrylic resin) to zirconia ceramics determine effects surface treatment with various priming agents. Methods A (CER) or resin (PAL) was bonded disks unpriming (UP) one seven agents ( n =11 each), namely, Alloy Primer (ALP), Clearfil Photo Bond (CPB), Porcelain Activator (CPB+Act), Metal Link (MEL), Meta Fast Bonding Liner (MFB), MR. (MRB), V-Primer (VPR). Shear strength determined before after 5000 thermocycles. The data were analyzed Kruskal–Wallis test Steel-Dwass test. Results mean pre-/post-thermalcycling 1.0–14.1MPa/0.1–12.1MPa for CER specimen 0.9–30.2MPa/0.1–11.1MPa PAL specimen. For specimen, ALP, CPB, CPB+Act groups had significantly higher among eight groups, at both 0 lower thermalcycling in all tested. After thermocycles, CPB than other groups. Conclusions specimens, MDP functional monomer improved bonding ceramics.
journalofprosthodonticresearch.com参考文章(37)
Christian Coachman, David Garber, Henry Salama, Marcelo Calamita, Guilherme Cabral, Maurice Salama, Prosthetic gingival reconstruction in a fixed partial restoration. Part 1: introduction to artificial gingiva as an alternative therapy. International Journal of Periodontics & Restorative Dentistry. ,vol. 29, pp. 471- 477 ,(2009)
Christian Coachman, David Garber, Henry Salama, Marcelo Calamita, Guilherme Cabral, Maurice Salama, Prosthetic gingival reconstruction in fixed partial restorations. Part 3: laboratory procedures and maintenance. International Journal of Periodontics & Restorative Dentistry. ,vol. 30, pp. 19- 29 ,(2010)
Alexander J Hassel, Alexander Kreuter, Peter Rammelsberg, Raed Shahin, Rehabilitation of an edentulous mandible with an implant-supported fixed prosthesis using an all-ceramic framework: a case report. Quintessence International. ,vol. 39, pp. 421- ,(2008)
Naomi Tanoue, Hideo Matsumura, Hiroaki Yanagida, Takako Ide, Yasuhiro Matsuda, Bond strength of poly(methyl methacrylate) denture base material to cast titanium and cobalt-chromium alloy. Journal of Adhesive Dentistry. ,vol. 12, pp. 223- 229 ,(2010) , 10.3290/J.JAD.A17550
Hirt Hp, Belser Uc, Dula K, Buser D, Berthold H, Localized ridge augmentation using guided bone regeneration. 1. Surgical procedure in the maxilla. International Journal of Periodontics & Restorative Dentistry. ,vol. 13, pp. 29- 45 ,(1993)
Jia-Hui Fu, Tae-Ju Oh, Erika Benavides, Ivan Rudek, Hom-Lay Wang, A randomized clinical trial evaluating the efficacy of the sandwich bone augmentation technique in increasing buccal bone thickness during implant placement surgery: I. Clinical and radiographic parameters. Clinical Oral Implants Research. ,vol. 25, pp. 458- 467 ,(2014) , 10.1111/CLR.12171
Mamaly Reshad, Domenico Cascione, Alexandre Amir Aalam, Fabrication of the mandibular implant-supported fixed restoration using CAD/CAM technology: a clinical report. Journal of Prosthetic Dentistry. ,vol. 102, pp. 271- 278 ,(2009) , 10.1016/S0022-3913(09)00123-1
Panos Papaspyridakos, Kunal Lal, Computer-assisted design/computer-assisted manufacturing zirconia implant fixed complete prostheses: clinical results and technical complications up to 4 years of function. Clinical Oral Implants Research. ,vol. 24, pp. 659- 665 ,(2013) , 10.1111/J.1600-0501.2012.02447.X
Michael Behr, Peter Proff, Carola Kolbeck, Sabine Langrieger, Johannes Kunze, Gerhard Handel, Martin Rosentritt, The bond strength of the resin-to-zirconia interface using different bonding concepts Journal of The Mechanical Behavior of Biomedical Materials. ,vol. 4, pp. 2- 8 ,(2011) , 10.1016/J.JMBBM.2010.08.002
Cenk Cura, Ahmet Saraçoǧlu, H Serdar Çötert, Alternative method for connecting a removable gingival extension and fixed partial denture: a clinical report. Journal of Prosthetic Dentistry. ,vol. 88, pp. 1- 3 ,(2002) , 10.1016/S0022-3913(02)00039-2