Performance enhancement of the double-layered micro-channel heat sink by use of tapered channels

作者: Behzad Osanloo , Akbar Mohammadi-Ahmar , Ali Solati , Mostafa Baghani

DOI: 10.1016/J.APPLTHERMALENG.2016.04.073

关键词:

摘要: In this paper performance of a double-layered micro-channel heat sink with tapered lower and upper channels (TDL-MCHS) is investigated numerically. Initially, numerical results were validated with results available in the literature and then uniformity of bottom wall temperature, thermal resistance and pressure drop for TDL-MCHS was evaluated for different flow rates of coolant and convergence angles. The results showed that by increasing the flow rate of coolant and the convergence angle of channels, thermal …

参考文章(36)
Frank P. Incropera, David P. DeWitt, Introduction to Heat Transfer ,(1985)
Tu-Chieh Hung, Wei-Mon Yan, Optimization of a Microchannel Heat Sink with Varying Channel Heights and Widths Numerical Heat Transfer Part A-applications. ,vol. 62, pp. 722- 741 ,(2012) , 10.1080/10407782.2012.709437
Kambiz Vafai, Lu Zhu, Analysis of two-layered micro-channel heat sink concept in electronic cooling International Journal of Heat and Mass Transfer. ,vol. 42, pp. 2287- 2297 ,(1999) , 10.1016/S0017-9310(98)00017-9
Ercan M. Dede, Yan Liu, Experimental and numerical investigation of a multi-pass branching microchannel heat sink Applied Thermal Engineering. ,vol. 55, pp. 51- 60 ,(2013) , 10.1016/J.APPLTHERMALENG.2013.02.038
Deewakar Sharma, Harry Garg, Parbar Pratham Singh, Vinod Karar, Numerical Study on the Performance of Double Layer Microchannel with Liquid Gallium and Water Advances in Mechanical Engineering. ,vol. 5, pp. 324578- ,(2013) , 10.1155/2013/324578
Leng Chuan, Xiao-Dong Wang, Tian-Hu Wang, Wei-Mon Yan, Fluid flow and heat transfer in microchannel heat sink based on porous fin design concept International Communications in Heat and Mass Transfer. ,vol. 65, pp. 52- 57 ,(2015) , 10.1016/J.ICHEATMASSTRANSFER.2015.04.005
Xiao-Dong Wang, Bin An, Lin Lin, Duu-Jong Lee, Inverse geometric optimization for geometry of nanofluid-cooled microchannel heat sink Applied Thermal Engineering. ,vol. 55, pp. 87- 94 ,(2013) , 10.1016/J.APPLTHERMALENG.2013.03.010
Lin Lin, Yang-Yang Chen, Xin-Xin Zhang, Xiao-Dong Wang, Optimization of geometry and flow rate distribution for double-layer microchannel heat sink International Journal of Thermal Sciences. ,vol. 78, pp. 158- 168 ,(2014) , 10.1016/J.IJTHERMALSCI.2013.12.009
Gongnan Xie, Zhiyong Chen, Bengt Sunden, Weihong Zhang, Numerical Predictions of the Flow and Thermal Performance of Water-Cooled Single-Layer and Double-Layer Wavy Microchannel Heat Sinks Numerical Heat Transfer Part A-applications. ,vol. 63, pp. 201- 225 ,(2013) , 10.1080/10407782.2013.730445
Xiaojin Wei, Yogendra Joshi, Michael K. Patterson, Experimental and Numerical Study of a Stacked Microchannel Heat Sink for Liquid Cooling of Microelectronic Devices Journal of Heat Transfer-transactions of The Asme. ,vol. 129, pp. 1432- 1444 ,(2007) , 10.1115/1.2754781