Tribological properties of sputter deposited ZrN coatings on titanium modified austenitic stainless steel

作者: Akash Singh , N. Kumar , P. Kuppusami , T.N. Prasanthi , P. Chandramohan

DOI: 10.1016/J.WEAR.2012.01.013

关键词:

摘要: Abstract Tribological behaviour of ZrN coatings deposited on titanium modified austenitic stainless steel (alloy D-9) substrates is investigated. The were in the deposition temperature range 300–873 K using pulsed magnetron sputtering technique. A comparative tribological study was performed with and ceramic balls such as alumina silicon nitride to evaluate frictional properties coatings. prepared at higher show lower value coefficient friction (COF) COF found be lowest ball. variation obtained further discussed relation morphology elemental distribution wear tracks

参考文章(34)
F.M. D'Heurle, J.M.E. Harper, Note on the origin of intrinsic stresses in films deposited via evaporation and sputtering Thin Solid Films. ,vol. 171, pp. 81- 92 ,(1989) , 10.1016/0040-6090(89)90035-7
Hermann A. Jehn, Multicomponent and multiphase hard coatings for tribological applications Surface & Coatings Technology. ,vol. 131, pp. 433- 440 ,(2000) , 10.1016/S0257-8972(00)00783-0
Erdem Atar, E. Sabri Kayali, Huseyin Cimenoglu, Sliding wear behaviour of ZrN and (Zr, 12 wt% Hf)N coatings Tribology International. ,vol. 39, pp. 297- 302 ,(2006) , 10.1016/J.TRIBOINT.2005.01.038
T. Elangovan, P. Kuppusami, R. Thirumurugesan, V. Ganesan, E. Mohandas, D. Mangalaraj, Nanostructured CrN thin films prepared by reactive pulsed DC magnetron sputtering Materials Science and Engineering B-advanced Functional Solid-state Materials. ,vol. 167, pp. 17- 25 ,(2010) , 10.1016/J.MSEB.2010.01.021
C.P. Constable, J. Yarwood, W.-D. Münz, Raman microscopic studies of PVD hard coatings Surface & Coatings Technology. ,vol. 116, pp. 155- 159 ,(1999) , 10.1016/S0257-8972(99)00072-9
Henry J. Ramos, Nicomedes B. Valmoria, Thin-film deposition of ZrN using a plasma sputter-type negative ion source Vacuum. ,vol. 73, pp. 549- 554 ,(2004) , 10.1016/J.VACUUM.2003.12.158
W. Kalss, A. Reiter, V. Derflinger, C. Gey, J.L. Endrino, Modern coatings in high performance cutting applications International Journal of Refractory Metals & Hard Materials. ,vol. 24, pp. 399- 404 ,(2006) , 10.1016/J.IJRMHM.2005.11.005