Stress induced martensite transformation texture in AISI 304 austenitic stainless steel
作者： HFG de Abreu , MJ Gomes da Silva , A Maia do Nascimento , FNC Freitas , None
DOI: 10.1179/026708310X12852304599906
关键词:
摘要: The phenomenological theory of martensitic transformation was applied to a tension induced in an AISI 304 austenitic stainless steel order estimate the texture. Input data were obtained from published literature. Calculated pole figures constructed assuming variant selection process based on Patel and Cohen’s theory, which emphasises that mechanical component free energy is driving force for at temperatures above martensite start Ms. results showed remarkably good match between calculated measured data.
sci-hub.se 参考文章(15)
G. B. Olson, Morris Cohen, Kinetics of strain-induced martensitic nucleation Metallurgical Transactions A. ,vol. 6, pp. 791- 795 ,(1975) , 10.1007/BF02672301
Yong Yang, Jie Lan, Xiaochun Li, Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 380, pp. 378- 383 ,(2004) , 10.1016/J.MSEA.2004.03.073
B.Ravi Kumar, A.K Singh, Samar Das, D.K Bhattacharya, Cold rolling texture in AISI 304 stainless steel Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 364, pp. 132- 139 ,(2004) , 10.1016/J.MSEA.2003.08.012
F. Lecroisey, A. Pineau, Martensitic transformations induced by plastic deformation in the Fe-Ni-Cr-C system Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 3, pp. 391- 400 ,(1972) , 10.1007/BF02642042
Saurabh Kundu, H.K.D.H. Bhadeshia, Crystallographic texture and intervening transformations Scripta Materialia. ,vol. 57, pp. 869- 872 ,(2007) , 10.1016/J.SCRIPTAMAT.2007.06.056
G. B. Olson, Morris Cohen, Stress-assisted isothermal martensitic transformation: Application to TRIP steels Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 13, pp. 1907- 1914 ,(1982) , 10.1007/BF02645934
J.S Bowles, J.K Mackenzie, The crystallography of martensite transformations I Acta Metallurgica. ,vol. 2, pp. 129- 137 ,(1954) , 10.1016/0001-6160(54)90102-9
A. F. Padilha, P. R. Rios, Decomposition of Austenite in Austenitic Stainless Steels Isij International. ,vol. 42, pp. 325- 327 ,(2002) , 10.2355/ISIJINTERNATIONAL.42.325
Saurabh Kundu, H.K.D.H. Bhadeshia, Transformation texture in deformed stainless steel Scripta Materialia. ,vol. 55, pp. 779- 781 ,(2006) , 10.1016/J.SCRIPTAMAT.2006.07.021
J.R. Patel, M. Cohen, Criterion for the action of applied stress in the martensitic transformation Acta Metallurgica. ,vol. 1, pp. 531- 538 ,(1953) , 10.1016/0001-6160(53)90083-2