Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer
作者： Thamir K. Ibrahim , Marwah N. Mohammed , Mohammed Kamil Mohammed , G. Najafi , Nor Azwadi Che Sidik
DOI: 10.1016/J.IJHEATMASSTRANSFER.2017.11.047
关键词:
摘要: Abstract This paper investigates the effect of perforation shape or geometry on heat transfer perforated fins. The type exchanger used is sink with fins under forced convection to determine performance for each between circular, rectangular, triangular and also non-perforated experimental result compared coefficient clarify best plate sink. fluid properties normally were studied experimentally numerically using CFD. difference numerical results was reported be about 8% 9% temperature distributions when power supplied are 150 W 100 W respectively. highest different fin circular which 51.29% at tip collector followed by rectangular 45.57% then 42.28% lastly 35.82%. perforations fines show a significant transfer.
core.ac.uk
sci-hub.se 参考文章(48)
Adrian Bejan, Allan D. Kraus, Heat transfer handbook Wiley. ,(2003)
Adrian Bejan, Convection heat transfer ,(1984)
V.S. Daund, A.A. Walunj, D.D. Palande, Review of Performance of Rectangular Fins under Natural Convection at Different Orientation of Heat Sink International Journal of Innovation and Applied Studies. ,vol. 6, pp. 232- 238 ,(2014)
Tahseen Ahmad Tahseen, M.M. Rahman, M. Ishak, Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow Procedia Engineering. ,vol. 105, pp. 46- 55 ,(2015) , 10.1016/J.PROENG.2015.05.005
Md. Farhad Ismail, Muhammad Noman Hasan, Mohammad Ali, Numerical simulation of turbulent heat transfer from perforated plate-fin heat sinks Heat and Mass Transfer. ,vol. 50, pp. 509- 519 ,(2014) , 10.1007/S00231-013-1242-8
Yap Zi Qin, Amer Nordin Darus, Nor Azwadi Che Sidik, Numerical Analysis on Natural Convection Heat Transfer of a Heat Sink with Cylindrical Pin Fin Applied Mechanics and Materials. ,vol. 695, pp. 398- 402 ,(2014) , 10.4028/WWW.SCIENTIFIC.NET/AMM.695.398
Petr Stehlík, Zdeněk Jegla, Bohuslav Kilkovský, Possibilities of intensifying heat transfer through finned surfaces in heat exchangers for high temperature applications Applied Thermal Engineering. ,vol. 70, pp. 1283- 1287 ,(2014) , 10.1016/J.APPLTHERMALENG.2014.05.052
Chien-Chang Wang, Chen-I Hung, Wei-Hsin Chen, Design of heat sink for improving the performance of thermoelectric generator using two-stage optimization Energy. ,vol. 39, pp. 236- 245 ,(2012) , 10.1016/J.ENERGY.2012.01.025
Yue-Tzu Yang, Huan-Sen Peng, Numerical study of pin-fin heat sink with un-uniform fin height design International Journal of Heat and Mass Transfer. ,vol. 51, pp. 4788- 4796 ,(2008) , 10.1016/J.IJHEATMASSTRANSFER.2008.02.017
Tahseen Ahmad Tahseen, M. Ishak, M.M. Rahman, An Overview on Thermal and Fluid Flow Characteristics in a Plain Plate Finned and Un-Finned Tube Banks Heat Exchanger Renewable & Sustainable Energy Reviews. ,vol. 43, pp. 363- 380 ,(2015) , 10.1016/J.RSER.2014.10.070