Laboratory-experimental verification of calculation of force effects in tractor's three-point hitch acting on driving wheels
作者： Petr Porte , Frantiek Bauer , Ji upera
DOI: 10.1016/J.STILL.2012.10.007
关键词:
摘要: Abstract The paper deals with the determination of tractor wheel load during tillage. Forces acting between and implement significantly change driving wheels. Mathematical description simple model fails due to impossibility these forces implement. article describes multi-body used for calculation resultant force torque from on a as well wheels soil. Paper also shows results verification calculations based experimental measurements carried out in laboratory tests performed under field conditions.
elsevier.com
sci-hub.se 参考文章(10)
N. B. McLaughlin, L. C. Heslop, D. J. Buckley, G. R. St. Amour, B. A. Compton, A. M. Jones, P. Van Bodegom, A General Purpose Tractor Instrumentation and Data Logging System Transactions of the ASABE. ,vol. 36, pp. 265- 273 ,(1993) , 10.13031/2013.28334
Abdulrahman Al-Janobi, A data-acquisition system to monitor performance of fully mounted implements. Journal of Agricultural Engineering Research. ,vol. 75, pp. 167- 175 ,(2000) , 10.1006/JAER.1999.0496
L.L. Kasisira, H.L.M. du Plessis, Energy optimization for subsoilers in tandem in a sandy clay loam soil Soil & Tillage Research. ,vol. 86, pp. 185- 198 ,(2006) , 10.1016/J.STILL.2005.02.031
Jonathan Chaplin, Michael Lueders, Youmin Zhao, Three-Point Hitch Dynamometer Design and Calibration Applied Engineering in Agriculture. ,vol. 3, pp. 10- 13 ,(1987) , 10.13031/2013.26634
Manoj Karkee, Brian L Steward, None, Parameter estimation and validation of a tractor and single axle towed implement dynamic system model Computers and Electronics in Agriculture. ,vol. 77, pp. 135- 146 ,(2011) , 10.1016/J.COMPAG.2011.04.005
B. Kolator, I. Białobrzewski, Original papers: A simulation model of 2WD tractor performance Computers and Electronics in Agriculture. ,vol. 76, pp. 231- 239 ,(2011) , 10.1016/J.COMPAG.2011.02.002
R.J. Godwin, A.J. Reynolds, M.J. O'Dogherty, A.A. Al-Ghazal, A triaxial dynamometer for force and moment measurements on tillage implements Journal of Agricultural Engineering Research. ,vol. 55, pp. 189- 205 ,(1993) , 10.1006/JAER.1993.1043
H. Bentaher, E. Hamza, G. Kantchev, A. Maalej, W. Arnold, Three-point hitch-mechanism instrumentation for tillage power optimization Biosystems Engineering. ,vol. 100, pp. 24- 30 ,(2008) , 10.1016/J.BIOSYSTEMSENG.2008.01.008
Manoj Karkee, Brian L Steward, None, Study of the open and closed loop characteristics of a tractor and a single axle towed implement system Journal of Terramechanics. ,vol. 47, pp. 379- 393 ,(2010) , 10.1016/J.JTERRA.2010.05.005
H.F Al-Jalil, A Khdair, W Mukahal, Design and performance of an adjustable three-point hitch dynamometer Soil & Tillage Research. ,vol. 62, pp. 153- 156 ,(2001) , 10.1016/S0167-1987(01)00219-7