Microstructural Evolution of Cr-Ta Powder in the Process of Mechanical Alloying
作者： Jing Yao , Shi Qiang Lu , Xuan Xiao
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.1094.300
关键词:
摘要: High energy ball mill tests under the condition of material mass ratio 13:1 and rotate speed 400 r/min have been employed to investigate process mechanical alloying (MA) Ta Cr powder mixed in mole 1:2.The microstructure evolution phase composition were explained useing scanning electron microscope (SEM) X-ray diffraction (XRD). The results show that, milled 20h existed (Cr) supersaturated solid solution amorphous after 40h. Although hours spent on milling reached 50h, Laves TaCr2 had not made during process.
sci-hub.se 参考文章(8)
Katherine C Chen, Fuming Chu, Paul G Kotula, Dan Thoma, HfCo 2 Laves Phase Intermetallics - Part II: Elastic and Mechanical Properties as a Function of Composition Intermetallics. ,vol. 9, pp. 785- 798 ,(2001) , 10.1016/S0966-9795(01)00067-X
F Stein, M Palm, G Sauthoff, Structure and stability of Laves phases. Part I. Critical assessment of factors controlling Laves phase stability Intermetallics. ,vol. 12, pp. 713- 720 ,(2004) , 10.1016/J.INTERMET.2004.02.010
C.T Liu, J.H Zhu, M.P Brady, C.G McKamey, L.M Pike, Physical metallurgy and mechanical properties of transition-metal Laves phase alloys Intermetallics. ,vol. 8, pp. 1119- 1129 ,(2000) , 10.1016/S0966-9795(00)00109-6
M. Venkatraman, J. P. Neumann, The Cr−Ta (Chromium-Tantalum) system Journal of Phase Equilibria. ,vol. 8, pp. 112- 116 ,(1987) , 10.1007/BF02873190
D.J. Thoma, J.H. Perepezko, A geometric analysis of solubility ranges in Laves phases Journal of Alloys and Compounds. ,vol. 224, pp. 330- 341 ,(1995) , 10.1016/0925-8388(95)01557-4
D.J Thoma, K.A Nibur, K.C Chen, J.C Cooley, L.B Dauelsberg, W.L Hults, P.G Kotula, The effect of alloying on the properties of (Nb,Ti)Cr2 C15 Laves phases Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 329, pp. 408- 415 ,(2002) , 10.1016/S0921-5093(01)01614-8
Sanboh Lee, P.K. Liaw, C.T. Liu, Y.T. Chou, Cracking in Cr–Cr2Nb eutectic alloys due to thermal stresses Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 268, pp. 184- 192 ,(1999) , 10.1016/S0921-5093(99)00068-4
M. Takeyama, C.T. Liu, Microstructure and mechanical properties of Laves-phase alloys based on Cr2Nb Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 132, pp. 61- 66 ,(1991) , 10.1016/0921-5093(91)90361-P