Theoretical Study on Mechanical Properties of 2-D Composite Models Containing Circular Fillers under Compression Load
作者： Sparisoma Viridi , Widayani , Siti Nurul Khotimah
DOI:
关键词:
摘要: This paper reports a theoretical study of stress distribution and factors that affect Young’s modulus 2D composite model containing circular fillers under compression loads. The dimension used for the 1 filler is (4x4) cm with radius cm. In case more rigid than matrix, values 2 are close to epoxy, Hemp fiber glass, respectively. matrix filler, we use same value LDPE HDPE, arranged in series parallel has been carried out matrix. (4x7) calculated using Excel data taken every increment X 0.1 results successfully showing qualitative picture on distribution. show not uniform along axis, but higher area longer component. specific total fraction method compared Voight Reuss formulas.
sapub.org参考文章(9)
Minoru Taya, Tsu-Wei Chou, On two kinds of ellipsoidal inhomogeneities in an infinite elastic body: An application to a hybrid composite International Journal of Solids and Structures. ,vol. 17, pp. 553- 563 ,(1981) , 10.1016/0020-7683(81)90018-4
Hyoung Seop Kim, Sun Ig Hong, Sun Jae Kim, On the rule of mixtures for predicting the mechanical properties of composites with homogeneously distributed soft and hard particles Journal of Materials Processing Technology. ,vol. 112, pp. 109- 113 ,(2001) , 10.1016/S0924-0136(01)00565-9
T. Glaskova, M. Zarrelli, A. Borisova, K. Timchenko, A. Aniskevich, M. Giordano, Method of quantitative analysis of filler dispersion in composite systems with spherical inclusions Composites Science and Technology. ,vol. 71, pp. 1543- 1549 ,(2011) , 10.1016/J.COMPSCITECH.2011.06.009
L. Nicolais, R. A. Mashelkar, The strength of polymeric composites containing spherical fillers Journal of Applied Polymer Science. ,vol. 20, pp. 561- 563 ,(1976) , 10.1002/APP.1976.070200226
Shao-Yun Fu, Xi-Qiao Feng, Bernd Lauke, Yiu-Wing Mai, Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites Composites Part B-engineering. ,vol. 39, pp. 933- 961 ,(2008) , 10.1016/J.COMPOSITESB.2008.01.002
H. Lu, Y. K. Lee, M. Oguri, J. M. Powers, Properties of a dental resin composite with a spherical inorganic filler. Operative Dentistry. ,vol. 31, pp. 734- 740 ,(2006) , 10.2341/05-154
J. Leidner, R. T. Woodhams, The strength of polymeric composites containing spherical fillers Journal of Applied Polymer Science. ,vol. 18, pp. 1639- 1654 ,(1974) , 10.1002/APP.1974.070180606
D. M. Bigg, Rheological analysis of highly loaded polymeric composites filled with non-agglomerating spherical filler particles Polymer Engineering and Science. ,vol. 22, pp. 512- 518 ,(1982) , 10.1002/PEN.760220810
Sparisoma Viridi, Widayani, Siti Nurul Khotimah, 2-D granular model of composite elasticity using molecular dynamics simulation INTERNATIONAL CONFERENCE ON PHYSICS AND ITS APPLICATIONS: (ICPAP 2011). ,vol. 1454, pp. 219- 222 ,(2012) , 10.1063/1.4730725