The coupling influence of airflow and temperature on the wall-wetted fuel film distribution
作者： Yong-sheng Cheng , Kangyao Deng , Tao Li
DOI: 10.1016/J.EXPTHERMFLUSCI.2009.10.031
关键词:
摘要: The coupling influence of airflow and temperature on the two-dimensional distribution film resulted from fuel spray impinging a horizontal flat wall was studied with experiments. direction perpendicular to vertical axis injection spray. results show that, as air velocity increases, shape turns circle an oblong. As area shrinks. Film thickness decreases or increases. boiling point is important affect thickness. center moves more far away in downstream For certain velocity, less
osti.gov
elsevier.com
sci-hub.se 参考文章(10)
Jiro Senda, Masanori Ohnishi, Tomohiro Takahashi, Hajime Fujimoto, Atsushi Utsunomiya, Michio Wakatabe, Measurement and Modeling on Wall Wetted Fuel Film Profile and Mixture Preparation in Intake Port of SI Engine SAE transactions. ,vol. 108, pp. 1083- 1098 ,(1999) , 10.4271/1999-01-0798
Constantine Arcoumanis, Flow and Heat Transfer Characteristics of Impinging Transient Diesel Sprays SAE Technical Paper Series. ,vol. 103, pp. 1092- 1116 ,(1994) , 10.4271/940678
T. Johnen, M. Haug, Spray Formation Observation and Fuel Film Development Measurements in the Intake of a Spark Ignition Engine SAE transactions. ,vol. 104, pp. 476- 487 ,(1995) , 10.4271/950511
Seoksu Moon, Choongsik Bae, Jaejoon Choi, Essam Abo-Serie, The influence of airflow on fuel spray characteristics from a slit injector Fuel. ,vol. 86, pp. 400- 409 ,(2007) , 10.1016/J.FUEL.2006.07.023
C. Arcoumanis, J -C. Chang, Heat transfer between a heated plate and an impinging transient diesel spray Experiments in Fluids. ,vol. 16, pp. 105- 119 ,(1993) , 10.1007/BF00944912
Julie E. Steinbrenner, Carlos H. Hidrovo, Fu-Min Wang, Sebastien Vigneron, Eon Soo Lee, Theresa A. Kramer, Ching-Hsiang Cheng, John K. Eaton, Kenneth E. Goodson, Measurement and modeling of liquid film thickness evolution in stratified two-phase microchannel flows Applied Thermal Engineering. ,vol. 27, pp. 1722- 1727 ,(2007) , 10.1016/J.APPLTHERMALENG.2006.07.020
Göran Almkvist, Ingemar Denbratt, Göran Josefsson, Ingemar Magnusson, Measurements of Fuel Film Thickness in the Inlet Port of an S.I. Engine by Laser Induced Fluorescence SAE transactions. ,vol. 104, pp. 2366- 2373 ,(1995) , 10.4271/952483
Jeffrey D Naber, Patrick V Farrell, Hydrodynamics of Droplet Impingement on a Heated Surface International Congress & Exposition. ,(1993) , 10.4271/930919
C. Arcoumanis, P. A. Cutter, Flow and Heat Transfer Characteristics of Impinging Diesel Sprays Under Cross-Flow Conditions SAE transactions. ,vol. 104, pp. 798- 812 ,(1995) , 10.4271/950448
Marwan Al-Roub, Patrick V. Farrell, Jiro Senda, Near wall interaction in spray impingement SAE transactions. ,vol. 105, pp. 1304- 1318 ,(1996) , 10.4271/960863