Effect of phenoxy-based coating resin for reinforcing pitch carbon fibers on the interlaminar shear strength of PA6 composites
作者： Jin Woo Yi , Wonoh Lee , Dong Gi Seong , Hee Jeong Won , Sang Woo Kim
DOI: 10.1016/J.COMPOSITESA.2016.04.028
关键词:
摘要: Abstract Carbon fiber-reinforced thermoplastic composites have not been considered as constituent materials for structural parts due to the poor interfacial adhesion between fiber and matrix. In this work, polyamide 6 (PA6) with pitch carbon fibers (pCF) were fabricated by alternatively stacking PA6 films pCF fabrics followed being pressed. order improve adhesion, phenoxy resin-based coated on surface of fiber. The analyses carried out XPS, TGA dynamic contact angle method. Interlaminar shear strength (ILSS) was measured evaluate effect coating materials. results showed that had higher ILSS than neat more 20%. This indicated a proper material can mechanical properties composites, which be applied parts.
sci-hub.se 参考文章(45)
J.L. Thomason, F.R. Jones, X.M. Liu, An XPS study of organosilane and sizing adsorption on e-glass fibre surface Japan Society of Composite Materials. ,(2007)
Deborah D. L. Chung, Carbon fiber composites ,(1994)
Peter Morgan, Carbon Fibers and Their Composites ,(2005)
Xiaojun Wang, Dongxia Xu, Hong-Yuan Liu, Helezi Zhou, Yiu-Wing Mai, Jie Yang, Eric Li, Effects of thermal residual stress on interfacial properties of polyphenylene sulphide/carbon fibre (PPS/CF) composite by microbond test Journal of Materials Science. ,vol. 51, pp. 334- 343 ,(2016) , 10.1007/S10853-015-9251-2
James E. Mark, Polymer Data Handbook ,(2009)
Yuan Liu, Xue Zhang, Chenchen Song, Yuanyuan Zhang, Yichao Fang, Bin Yang, Xinling Wang, An effective surface modification of carbon fiber for improving the interfacial adhesion of polypropylene composites Materials & Design. ,vol. 88, pp. 810- 819 ,(2015) , 10.1016/J.MATDES.2015.09.100
Youngjae Yoo, Hoing Lae Lee, Sung Min Ha, Byung Kuk Jeon, Jong Chan Won, Sung-Goo Lee, Effect of graphite and carbon fiber contents on the morphology and properties of thermally conductive composites based on polyamide 6 Polymer International. ,vol. 63, pp. 151- 157 ,(2014) , 10.1002/PI.4534
Pawittar S. Arora, Janis G. Matisons, Arthur Provatas, Roger St. C. Smart, Aminohydroxysiloxanes on E-Glass Fibers Langmuir. ,vol. 11, pp. 2009- 2017 ,(1995) , 10.1021/LA00006A030
Michael Q. Tran, Kingsley K.C. Ho, Gerhard Kalinka, Milo S.P. Shaffer, Alexander Bismarck, Carbon fibre reinforced poly(vinylidene fluoride): Impact of matrix modification on fibre/polymer adhesion Composites Science and Technology. ,vol. 68, pp. 1766- 1776 ,(2008) , 10.1016/J.COMPSCITECH.2008.02.021
Michael Noeske, Jost Degenhardt, Silke Strudthoff, Uwe Lommatzsch, Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion International Journal of Adhesion and Adhesives. ,vol. 24, pp. 171- 177 ,(2004) , 10.1016/J.IJADHADH.2003.09.006