Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

作者: Musango Lungu , Haotong Wang , Jingdai Wang , Yongrong Yang , Fengqiu Chen

DOI: 10.1021/ACS.IECR.5B04511

关键词:

摘要: … Numerical simulations using the Gidaspow and Syamlal-O’Brien drag models have been performed based on the National Energy Technology Laboratory small scale challenge …

参考文章(47)
Nan Xie, Francine Battaglia, Sreekanth Pannala, Effects of using two- versus three-dimensional computational modeling of fluidized beds: Part I, hydrodynamics Powder Technology. ,vol. 182, pp. 1- 13 ,(2008) , 10.1016/J.POWTEC.2007.07.005
Mayank Kashyap, Dimitri Gidaspow, Circulation of Geldart D type particles: Part II—Low solids fluxes: Measurements and computation under dilute conditions Chemical Engineering Science. ,vol. 66, pp. 1649- 1670 ,(2011) , 10.1016/J.CES.2010.12.043
Shailesh S. Ozarkar, Xiaokang Yan, Shuyan Wang, Christian C. Milioli, Fernando E. Milioli, Sankaran Sundaresan, Validation of filtered two-fluid models for gas–particle flows against experimental data from bubbling fluidized bed Powder Technology. ,vol. 284, pp. 159- 169 ,(2015) , 10.1016/J.POWTEC.2015.06.028
J.B. Joshi, K. Nandakumar, Computational Modeling of Multiphase Reactors Annual Review of Chemical and Biomolecular Engineering. ,vol. 6, pp. 347- 378 ,(2015) , 10.1146/ANNUREV-CHEMBIOENG-061114-123229
Rupen Panday, Lawrence J Shadle, Mehrdad Shahnam, Ray Cocco, Allan Issangya, James S Spenik, J Christopher Ludlow, Balaji Gopalan, Franklin Shaffer, Madhava Syamlal, Chris Guenther, SB Reddy Karri, Ted Knowlton, None, Challenge problem: 1. Model validation of circulating fluidized beds Powder Technology. ,vol. 258, pp. 370- 391 ,(2014) , 10.1016/J.POWTEC.2014.02.010
Tingwen Li, Jean-François Dietiker, Mehrdad Shahnam, MFIX simulation of NETL/PSRI challenge problem of circulating fluidized bed Chemical Engineering Science. ,vol. 84, pp. 746- 760 ,(2012) , 10.1016/J.CES.2012.09.024
Peng Tian, Yingxu Wei, Mao Ye, Zhongmin Liu, Methanol to Olefins (MTO): From Fundamentals to Commercialization ACS Catalysis. ,vol. 5, pp. 1922- 1938 ,(2015) , 10.1021/ACSCATAL.5B00007
Musango Lungu, Yefeng Zhou, Jingdai Wang, Yongrong Yang, A CFD study of a bi-disperse gas–solid fluidized bed: Effect of the EMMS sub grid drag correction Powder Technology. ,vol. 280, pp. 154- 172 ,(2015) , 10.1016/J.POWTEC.2015.04.032
Veeraya Jiradilok, Dimitri Gidaspow, Somsak Damronglerd, William J. Koves, Reza Mostofi, Kinetic theory based CFD simulation of turbulent fluidization of FCC particles in a riser Chemical Engineering Science. ,vol. 61, pp. 5544- 5559 ,(2006) , 10.1016/J.CES.2006.04.006