Liquid flow through aligned fiber beds
作者： C. E. M. Morris , B. C. Ennis , J. G. Williams
关键词:
摘要: The influence of surface properties on the flow fluids, including epoxy resin, through aligned glass and other fiber beds has been examined. observed rates were higher than those predicted from Kozeny-Carman equation, influenced by fluid used. This is attributed to variations in distribution porosities presence air bubbles trapped during initial wetting bed. implications these findings preparation composites are discussed.
sci-hub.se 参考文章(12)
R. M. Barrer, Fluid flow in porous media Discussions of The Faraday Society. ,vol. 3, pp. 61- 72 ,(1948) , 10.1039/DF9480300061
E. J. Wiggins, W. B. Campbell, O. Maass, DETERMINATION OF THE SPECIFIC SURFACE OF FIBROUS MATERIALS Canadian journal of research. pp. 318- 324 ,(1939) , 10.1139/CJR39B-044
P. J. Rigden, The specific surface of powders. A modification of the theory of the air‐permeability method Journal of Chemical Technology & Biotechnology. ,vol. 66, pp. 130- 136 ,(1947) , 10.1002/JCTB.5000660407
E. Lord, 10—Air Flow through Plugs of Textile Fibres Part 1—General Flow Relations Journal of The Textile Institute Transactions. ,vol. 46, ,(1955) , 10.1080/19447027.1955.10750307
R. R. Sullivan, K. L. Hertel, The Flow of Air Through Porous Media Journal of Applied Physics. ,vol. 11, pp. 761- 765 ,(1940) , 10.1063/1.1712733
G. Inverarity, Dynamic wetting of glass fibre and polymer fibre British Polymer Journal. ,vol. 1, pp. 245- 251 ,(1969) , 10.1002/PI.4980010601
R. R. Sullivan, Specific Surface Measurements on Compact Bundles of Parallel Fibers Journal of Applied Physics. ,vol. 13, pp. 725- 730 ,(1942) , 10.1063/1.1714824
D. J. Gunn, A. R. Aitken, The hydraulic characteristics of two‐phase co‐current flow through glass fibres Canadian Journal of Chemical Engineering. ,vol. 39, pp. 209- 214 ,(1961) , 10.1002/CJCE.5450390508
Chwan Pein Kyan, Darshanlal T Wasan, Robert C Kintner, Flow of Single-Phase Fluids through Fibrous Beds Industrial & Engineering Chemistry Fundamentals. ,vol. 9, pp. 596- 603 ,(1970) , 10.1021/I160036A012
M. M. Roy, THE AIR FLOW METHOD OF MEASURING THE SPECIFIC SURFACE OF JUTE—II: The Study of Chemically Treated Fibres Journal of The Textile Institute Transactions. ,vol. 44, ,(1953) , 10.1080/19447025308659732