Steam trap control valve for enhancing steam flood performance in an Omani heterogeneous heavy oil field

作者: Ibrahim Al Hadabi , Kyuro Sasaki , Yuichi Sugai , Amin Yousefi-Sahzabi

DOI: 10.1016/J.JUOGR.2016.03.005

关键词:

摘要: Abstract In this research, a numerical feasibility study of the thermal oil recovery using steam injection has been carried out for heterogeneous heavy field located in southern Oman. There are several technical challenges designing EOR operation system reservoir with permeability. A simulation developed to investigate optimum heat transfer reduce viscosity more efficiency. The CMG STARSTM model was used valve control trap subcool field. results showed that can result wider and faster temperature transmission distribution after injection. It also shown relatively higher production lower required temperature. Finally, it suggested by setting on 20–30 °C control, efficiency be increased better SOR (steam ratio) RF (recovery factor) achieved.

参考文章(25)
James F. McCauley, The steam trap handbook ,(1995)
H.K. van Poollen, Fundamentals of enhanced oil recovery PennWell Books,. ,(1980)
Biji Shibulal, Saif N. Al-Bahry, Yahya M. Al-Wahaibi, Abdulkader E. Elshafie, Ali S. Al-Bemani, Sanket J. Joshi, Microbial enhanced heavy oil recovery by the aid of inhabitant spore-forming bacteria: an insight review. The Scientific World Journal. ,vol. 2014, pp. 309159- 309159 ,(2014) , 10.1155/2014/309159
Neil Edmunds, Harbir Chhina, Economic Optimum Operating Pressure for SAGD Projects in Alberta Journal of Canadian Petroleum Technology. ,vol. 40, ,(2001) , 10.2118/01-12-DAS
Gary F. Teletzke, Prateek Dinesh Patel, Amy Chen, Methodology for Miscible Gas Injection EOR Screening SPE International Improved Oil Recovery Conference in Asia Pacific. ,(2005) , 10.2118/97650-MS
Dennis Denney, EOR Potential in the Middle East: Current and Future Trends Journal of Petroleum Technology. ,vol. 64, pp. 70- 73 ,(2012) , 10.2118/0112-0070-JPT
N. Edmunds, Investigation of SAGD Steam Trap Control in Two and Three Dimensions Journal of Canadian Petroleum Technology. ,vol. 39, ,(2000) , 10.2118/00-01-02