Correlation of Measured Load-Displacement Curves in Small Punch Tests with Tensile Stress-Strain Curves
作者： Nicolas Leclerc , Ali Khosravani , Sepideh Hashemi , Daniel B. Miracle , Surya R. Kalidindi
DOI: 10.1016/J.ACTAMAT.2020.116501
关键词:
摘要: … the uniaxial stress-strain curves from the SPT measured load-displacement curves. This is … (FE) simulations that take as input the uniaxial stress-strain response of the material. After …
sci-hub.st 参考文章(57)
André L. M. Costa, David J. Shuman, Margareth S. Andrade, Renato R. Machado, DETERMINATION OF THE COMPLIANCE OF AN INSTRUMENTED INDENTATION TESTING MACHINE ,(2004)
D. D. Hass, H. N. Wadley, K. Dharmasena, An Electron Beam Method for Creating Combinatorial Libraries: Application to Next Generation Thermal Barrier Coatings Systems ,(2002)
Yu H. Chen, Se Un Park, Dennis Wei, Greg Newstadt, Michael A. Jackson, Jeff P. Simmons, Marc De Graef, Alfred O. Hero, A Dictionary Approach to Electron Backscatter Diffraction Indexing Microscopy and Microanalysis. ,vol. 21, pp. 739- 752 ,(2015) , 10.1017/S1431927615000756
E. Altstadt, H.E. Ge, V. Kuksenko, M. Serrano, M. Houska, M. Lasan, M. Bruchhausen, J.-M. Lapetite, Y. Dai, Critical evaluation of the small punch test as a screening procedure for mechanical properties Journal of Nuclear Materials. ,vol. 472, pp. 186- 195 ,(2016) , 10.1016/J.JNUCMAT.2015.07.029
David Tabor, The Hardness of Metals ,(2000)
CS Catherine, J Messier, C Poussard, S Rosinski, J Foulds, Small Punch Test : EPRI-CEA Finite Element Simulation Benchmark and Inverse Method for the Estimation of Elastic Plastic Behavior ASTM International. ,(2002) , 10.1520/STP10832S
Zhiying Chen, Xianghuai Dong, The GTN damage model based on Hill'48 anisotropic yield criterion and its application in sheet metal forming Computational Materials Science. ,vol. 44, pp. 1013- 1021 ,(2009) , 10.1016/J.COMMATSCI.2008.07.020
Asif Husain, D.K. Sehgal, R.K. Pandey, An inverse finite element procedure for the determination of constitutive tensile behavior of materials using miniature specimen Computational Materials Science. ,vol. 31, pp. 84- 92 ,(2004) , 10.1016/J.COMMATSCI.2004.01.039
Marilena C. Butuc, Cristian Teodosiu, Frédéric Barlat, José J. Gracio, Analysis of sheet metal formability through isotropic and kinematic hardening models European Journal of Mechanics A-solids. ,vol. 30, pp. 532- 546 ,(2011) , 10.1016/J.EUROMECHSOL.2011.03.005
Du-Cheng Tsai, Fuh-Sheng Shieu, Shou-Yi Chang, Hsiao-Chiang Yao, Min-Jen Deng, Structures and Characterizations of TiVCr and TiVCrZrY Films Deposited by Magnetron Sputtering under Different Bias Powers Journal of The Electrochemical Society. ,vol. 157, ,(2010) , 10.1149/1.3285047