Effect of solidification rate on the microstructure and microhardness of a melt-spun Al–8Si–1Sb alloy
作者： E. Karaköse , M. Keskin
DOI: 10.1016/J.JALLCOM.2009.01.006
关键词:
摘要: Abstract The properties of rapidly solidified hypoeutectic Al–8Si–1Sb alloy, produced by melt-spinning technique at a different solidification rates, were investigated using the X-ray diffraction (XRD), optical microscopy (OM), scanning electron (SEM) together with energy dispersive spectroscopy (EDS), differential calorimetry (DSC) and microhardness technique. ribbons then compared those chill-casting alloy. results show that rapid has influence on phase constitution phases present in ingot alloy determined to be α-Al, fcc Si intermetallic AlSb whereas only α-Al identified significant effect microstructure Particle size is too small compare particle Moreover, change hardness occurs attributed changes microstructure.
elsevier.com
sci-hub.se 参考文章(22)
Bian Xiufang, Wang Weimin, Yuan Shujuan, Qin Jingyu, Structure factors of modified liquid Al–Si alloys Science and Technology of Advanced Materials. ,vol. 2, pp. 19- 23 ,(2001) , 10.1016/S1468-6996(01)00020-1
Orhan Uzun, Tuncay Karaaslan, Mustafa Keskin, Hardness evaluation of Al–12Si–0.5Sb melt–spun ribbons Journal of Alloys and Compounds. ,vol. 358, pp. 104- 111 ,(2003) , 10.1016/S0925-8388(03)00070-7
P. Todeschini, G. Champier, F. H. Samuel, Production of Al-(12–25) wt% Si alloys by rapid solidification: melt spinning versus centrifugal atomization Journal of Materials Science. ,vol. 27, pp. 3539- 3551 ,(1992) , 10.1007/BF01151831
N Ünlü, A Genç, M.L Öveçoǧlu, E.J Lavernia, F.H Froes, Microstructural evolution during annealing of the melt-spun ternary hypoeutectic Al–7.6Si–3.3Fe (in wt.%) alloy Journal of Alloys and Compounds. ,vol. 343, pp. 223- 233 ,(2002) , 10.1016/S0925-8388(02)00284-0
D. Srinivasan, K. Chattopadhyay, Hardness of high strength nanocomposite Al–X–Zr (X = Si,Cu,Ni) alloys Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 375, pp. 1228- 1234 ,(2004) , 10.1016/J.MSEA.2003.10.189
P. Van Mourik, E. J. Mittemeijer, Th. H. De Keijser, On precipitation in rapidly solidified aluminium-silicon alloys Journal of Materials Science. ,vol. 18, pp. 2706- 2720 ,(1983) , 10.1007/BF00547587
E.M. Ahmed, Physical properties of as melt spun Al–7 wt.% Si–x wt.% Ti Materials Letters. ,vol. 62, pp. 960- 963 ,(2008) , 10.1016/J.MATLET.2007.07.040
Ismeli Alfonso López, Cuauhtémoc Maldonado Zepeda, José Gonzalo González Reyes, Ariosto Medina Flores, Juan Serrato Rodríguez, Luis Béjar Gómez, TEM microstructural characterization of melt-spun aged Al-6Si-3Cu-xMg alloys Materials Characterization. ,vol. 58, pp. 509- 518 ,(2007) , 10.1016/J.MATCHAR.2006.06.020
M. van Rooyen, N.M. van der Pers, Th.H. de Keijser, E.J. Mittemeijer, Structure refinement and improved mechanical properties of Al-20wt.% Si by rapid solidification in conjunction with strontium modification Materials Science and Engineering. ,vol. 96, pp. 17- 25 ,(1987) , 10.1016/0025-5416(87)90536-2
Kiyotaka Matsuura, Tatsuya Ohmi, Masayuki Kudoh, Heishichiro Takahashi, Hiroshi Kinoshita, Kazuhiro Suzuki, Dispersion strengthening in a hypereutectic Al-Si alloy prepared by extrusion of rapidly solidified powder Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 35, pp. 333- 339 ,(2004) , 10.1007/S11661-004-0134-4