The properties and wear resistance of the CrN PVD coatings
作者： M. Poloc-Rubiniec , M. Adamiak , L. Dobrzański
DOI:
关键词:
摘要: AbstrAct Purpose: The aim of the paper is comparison mechanical properties and wear resistance monolayer CrN PVD coatings deposited onto heat treated plasma nitrited X37CrMoV5-1 type hot work tool steel. Design/methodology/approach: microhardness tests were made on dynamic ultra-microhardness tester. surfaces’ thopography structure was observed scanning electron microscopy. evaluation adhesion to substrate using scratch test. friction performed a pin-on-disc device at room temperature 500°C. coefficient between ball disc measured during Findings: : In case coating nitrided steel very good has been revealed material in Taking into account results measurements, one can state that lowest certain conditions both elevated temperatures displays X37CrMo V5-1 type.
参考文章(15)
M. Adamiak, L. A. Dobrzański, M. Polok-Rubiniec, Comparison of the adhesion and wear resistance of the PVD coatings Journal of achievements in materials and manufacturing engineering. ,vol. 20, pp. 279- 282 ,(2007)
K. Lukaszkowicz, L. A. Dobrzański, M. Pancielejko, Mechanical properties of the PVD gradient coatings deposited onto the hot work tool steel X40CrMoV5-1 Journal of achievements in materials and manufacturing engineering. ,vol. 24, pp. 115- 118 ,(2007)
B. Kosec, M. Soković, G. Kosec, Case of temperature field and failure analysis of die-casting die Journal of achievements in materials and manufacturing engineering. ,vol. 20, pp. 471- 474 ,(2007)
K. Lukaszkowicz, L. A. Dobrzański, D. Pakuła, J. Mikuła, Corrosion resistance of multilayer and gradient coatings deposited by PVD and CVD techniques Archives of materials science and engineering. ,vol. 28, pp. 12- 18 ,(2007)
Francis Clarysse, Walter Lauwerens, Michel Vermeulen, Tribological properties of PVD tool coatings in forming operations of steel sheet Wear. ,vol. 264, pp. 400- 404 ,(2008) , 10.1016/J.WEAR.2006.08.031
C.X. Li, T. Bell, Potential of plasma nitriding of polymer for improved hardness and wear resistance Journal of Materials Processing Technology. ,vol. 168, pp. 219- 224 ,(2005) , 10.1016/J.JMATPROTEC.2004.10.018
M. Soković, P. Panjan, R. Kirn, Possibilities of improvement of dies casting tools with duplex treatment Journal of Materials Processing Technology. ,vol. 157, pp. 613- 616 ,(2004) , 10.1016/J.JMATPROTEC.2004.07.145
S.K. Pradhan, C. Nouveau, A. Vasin, M.-A. Djouadi, Deposition of CrN coatings by PVD methods for mechanical application Surface & Coatings Technology. ,vol. 200, pp. 141- 145 ,(2005) , 10.1016/J.SURFCOAT.2005.02.038
R. Rodríguez-Baracaldo, J.A. Benito, E.S. Puchi-Cabrera, M.H. Staia, High temperature wear resistance of (TiAl)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments Wear. ,vol. 262, pp. 380- 389 ,(2007) , 10.1016/J.WEAR.2006.06.010
L. Ceschini, E. Lanzoni, C. Martini, D. Prandstraller, G. Sambogna, Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating Wear. ,vol. 264, pp. 86- 95 ,(2008) , 10.1016/J.WEAR.2007.01.045