Hot Deformation Behavior of As-Cast and Homogenized Al0.5CoCrFeNi High Entropy Alloys
作者： Yu Zhang , Jinshan Li , Jun Wang , Sizhe Niu , Hongchao Kou
DOI: 10.3390/MET6110277
关键词:
摘要: The hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys (HEAs) during isothermal compression was investigated as a function temperature strain rate. Results indicated that flow stress in state always higher than an under the same conditions. Moreover, optimum thermo-mechanical processing (TMP) conditions for working were identified 945–965 °C 10−1.7–10−1.1 s−1 easier to determine practice. Constitutive equations, both states, correlating with rate also determined.
doaj.org
core.ac.uk 参考文章(37)
M. Claudia Troparevsky, James R. Morris, Markus Daene, Yang Wang, Andrew R. Lupini, G. Malcolm Stocks, Beyond Atomic Sizes and Hume-Rothery Rules: Understanding and Predicting High-Entropy Alloys JOM. ,vol. 67, pp. 2350- 2363 ,(2015) , 10.1007/S11837-015-1594-2
Yanqiu Zhang, Shuyong Jiang, Yanan Zhao, Debin Shan, Isothermal precision forging of complex-shape rotating disk of aluminum alloy based on processing map and digitized technology Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 580, pp. 294- 304 ,(2013) , 10.1016/J.MSEA.2013.05.059
B. Gludovatz, A. Hohenwarter, D. Catoor, E. H. Chang, E. P. George, R. O. Ritchie, A fracture-resistant high-entropy alloy for cryogenic applications Science. ,vol. 345, pp. 1153- 1158 ,(2014) , 10.1126/SCIENCE.1254581
Bo Li, Qinglin Pan, Zhimin Yin, Characterization of hot deformation behavior of as-homogenized Al–Cu–Li–Sc–Zr alloy using processing maps Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 614, pp. 199- 206 ,(2014) , 10.1016/J.MSEA.2014.07.031
Yongbiao Yang, Zhimin Zhang, Xing Zhang, None, Processing map of Al2O3 particulate reinforced Al alloy matrix composites Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 558, pp. 112- 118 ,(2012) , 10.1016/J.MSEA.2012.07.092
Chung-Huang Tsai, Factor analysis of the clustering of common somatic symptoms: a preliminary study. BMC Health Services Research. ,vol. 10, pp. 160- 160 ,(2010) , 10.1186/1472-6963-10-160
Y.V.R.K. Prasad, T. Seshacharyulu, Processing maps for hot working of titanium alloys Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 243, pp. 82- 88 ,(1998) , 10.1016/S0921-5093(97)00782-X
Niraj Nayan, Gaurav Singh, S.V.S.N. Murty, Abhay K. Jha, Bhanu Pant, Koshy M. George, Upadrasta Ramamurty, Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy Intermetallics. ,vol. 55, pp. 145- 153 ,(2014) , 10.1016/J.INTERMET.2014.07.019
Woei-Ren Wang, Wei-Lin Wang, Jien-Wei Yeh, Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures Journal of Alloys and Compounds. ,vol. 589, pp. 143- 152 ,(2014) , 10.1016/J.JALLCOM.2013.11.084
ND Stepanov, DG Shaysultanov, N Yu Yurchenko, SV Zherebtsov, AN Ladygin, GA Salishchev, MA Tikhonovsky, None, High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 636, pp. 188- 195 ,(2015) , 10.1016/J.MSEA.2015.03.097